Black Diamond on 33’s and 17X9 Bronze Fuel Shok +1 offset

[Mustang Mike]

oh man, my 2 door first day res was built on 7/12 and is still being held captive. when did yours land?

I was built on 6/23 and finally got it on 11/17

 

[skiborsy]

Looks good. Have the 18” Shoks on my TRX but think they look great on Broncos too!

 

[Mustang Mike]

Check your Sidewall near the date plug. You see a A3. Those grabbers were made at my plant!!

 

[618TRVLWILD]

That’s us! Pretty sure 17s are made in our new facility. I build 20s at the moment, myself. Say your takes offs were from here too!!

 

[zyglyrox]

It’s the Yakima Skyrise HD in the Ford Accessory Catalog, here is a picture of it mounted in a 2 door. I opened it on the floor of my garage and it was pretty big inside. For context I was in the infantry so it’s the penthouse suite as far as I’m concerned!

The 4 door definitely checks all the boxes for room, cargo space and utility but for me it didn’t check the one box that trumps all other boxes

2 doors look wicked!

Yeah I agree, the 2door is the much better looking platform. Ugh, you’re making me reconsider my choices .
I’ll have to look into that tent setup,

 

[Mustang Mike]

That’s us! Pretty sure 17s are made in our new facility. I build 20s at the moment, myself. Say your takes offs were from here too!!

My ATX’s are my dedicated winters! I love General Tire I’ve been running them as a winter for years!

 

[618TRVLWILD]

My ATX’s are my dedicated winters! I love General Tire I’ve been running them as a winter for years!

I’ll be going with Red Letters once I’m done with the Goodyears. I ran red letters on almost all my SUVs.

 

[Gritty]

I’ll be fitting the RTT first on the factory crossbars. Seeing as it’s a very small 2 person tent I’m hopeful it’ll be ok, if all appears strong and safe I won’t fork out for the Yakima crossbars. I’d prefer to keep it as low profile as possible and to also save some money using the OE bars? I don’t think the third bar would work as the footprint of the tent is too small?

Thks for the feedback.....hopefully I'll be out there soon

 

[Mustang Mike]

Thks for the feedback.....hopefully I'll be out there soon

Fingers crossed man!

 

[Mustang Mike]

Thks for the feedback.....hopefully I'll be out there soon

Also GRITTY! LoL

 

[Mustang Mike]

Front windows tinted, before & after:

 

[huck2080]

looks good , how did you mount your front plate

 

[Mustang Mike]

looks good , how did you mount your front plate

 

[SnowBronco]

Looks great!! Yeah SAS flares are the way to go. I did that on my Badlands with the Shoks.

 

[Cat]

Here’s my Velocity Blue, 2.7L, BD, Non Sas, 2 Door.

After getting parole from Dirt Mountain Penitentiary I’m scrambling to get all my wrenching done while the weather is still decent!

- General Grabber X3s 295/70/17 (33.3”)
- 17X9 Bronze Fuel Shok with 1 offset
- No lift (but pulled out crash bars)
- Planned to do a 2” RC spacer lift but I might see how I like it at the factory ride height?
- Roof top tent to be installed (maybe this coming weekend?
- Front windows getting tint next week
- Oil spray next week.

Looks fabulous! Are you concerned about rock chips with that poke?

Here’s my Velocity Blue, 2.7L, BD, Non Sas, 2 Door.

After getting parole from Dirt Mountain Penitentiary I’m scrambling to get all my wrenching done while the weather is still decent!

- General Grabber X3s 295/70/17 (33.3”)
- 17X9 Bronze Fuel Shok with 1 offset
- No lift (but pulled out crash bars)
- Planned to do a 2” RC spacer lift but I might see how I like it at the factory ride height?
- Roof top tent to be installed (maybe this coming weekend?
- Front windows getting tint next week
- Oil spray next week.