Sponsored

Boomba Racing

Wildtrak
Well-Known Member
Lux Sponsor (Level 2)
First Name
Boomba Racing
Joined
Jan 12, 2022
Threads
41
Messages
217
Reaction score
293
Location
Wood Dale, IL
Website
www.boombaracing.com
Vehicle(s)
BRONCO
Your Bronco Model
Wildtrak
Looking for a turbo noise? How about that sweet sound of a Blow Off Valve during shifts or letting off throttle? Well look no further we have them available for both the 2.3 as well as the 2.7 Ecoboost engines.

Ford Bronco Blow Off Valve Adapter now available For the Ford Bronco! EcoBoost BOVA V2 copy WEB


This BOV adapter mounts between the OEM bypass valve/solenoid and the charge pipe, causing the unused charge air to vent to atmosphere (VTA) giving off the well known, but distinct sound all turbo owners know and love! The adapter bolts right in with the included longer bolts, no other modifications or tuning are required. Precision CNC machined out of high quality aircraft grade billet aluminum and available in 4 different colors

Installation is simple and all mounting hardware is included.


Installation guide for the 2.3 Ecoboost
https://www.boombaracing.com/content/Ranger BOVA Install 3.pdf

Installation guide for the 2.7 Ecoboost
https://www.boombaracing.com/content/Bronco V6 BOVA Install.pdf

Sound clip!



Start shopping by clicking this link below!
Boomba Racing Website
Sponsored

 

JoeSpeed

Banned
Badlands
Banned
Banned
First Name
Mike
Joined
Apr 19, 2021
Threads
32
Messages
1,028
Reaction score
1,053
Location
Eatontown, Jersey
Vehicle(s)
2dr 2.3 Manual
Your Bronco Model
Badlands
Clubs
 
Shame I ordered a bov already, though any shifter parts and mounts being worked on?
 

EXO Bronco

Badlands
Well-Known Member
First Name
Matt
Joined
Sep 30, 2021
Threads
10
Messages
150
Reaction score
556
Location
Upland, CA
Vehicle(s)
Explorer ST, Audi S4, Raptor (Previously)
Your Bronco Model
Badlands
Question:

On vehicles I had installed these on years ago (Subaru, VW, etc) the big drawback with the 100% atmosphere vent was that the factory BOV return is "downstream" of the MAF sensor, which had already accounted for the air that is then released with the aftermarket valve... resulting in the system "thinking" it has more incoming air than it really does. This results in a rich mixture momentarily, and would cause blackening of the exhaust tips very noticeably!

Is this an issue on these modern Ford ecoboost engines?
 

427Comet

Wildtrak
Well-Known Member
First Name
Bill
Joined
Mar 28, 2021
Threads
3
Messages
59
Reaction score
140
Location
Graham washington
Vehicle(s)
Super duty, 65 comet cyclone
Your Bronco Model
Wildtrak
Clubs
 
Will the new PHSSSSS! Noise void the warranty ?
 

Sponsored
OP
OP
Boomba Racing

Boomba Racing

Wildtrak
Well-Known Member
Lux Sponsor (Level 2)
First Name
Boomba Racing
Joined
Jan 12, 2022
Threads
41
Messages
217
Reaction score
293
Location
Wood Dale, IL
Website
www.boombaracing.com
Vehicle(s)
BRONCO
Your Bronco Model
Wildtrak
Shame I ordered a bov already, though any shifter parts and mounts being worked on?
There is definitely a ton more products we are looking to release for the Bronco platform that is for sure and those are some products we are going to be researching as well!
 
OP
OP
Boomba Racing

Boomba Racing

Wildtrak
Well-Known Member
Lux Sponsor (Level 2)
First Name
Boomba Racing
Joined
Jan 12, 2022
Threads
41
Messages
217
Reaction score
293
Location
Wood Dale, IL
Website
www.boombaracing.com
Vehicle(s)
BRONCO
Your Bronco Model
Wildtrak
Question:

On vehicles I had installed these on years ago (Subaru, VW, etc) the big drawback with the 100% atmosphere vent was that the factory BOV return is "downstream" of the MAF sensor, which had already accounted for the air that is then released with the aftermarket valve... resulting in the system "thinking" it has more incoming air than it really does. This results in a rich mixture momentarily, and would cause blackening of the exhaust tips very noticeably!

Is this an issue on these modern Ford ecoboost engines?
Excellent question, I can definitely understand where you’re coming from with concern to the vehicle not functioning properly, however on Ford’s US market Ecoboost vehicles, this is nothing to worry about.

No check engine light or loss of performance is caused by using this blow off valve adapter. Running our BOV/BOV adapter will not effect the fuel trim or throw a code for a couple of different reasons. The biggest reason is due to the way Ford tunes their USDM turbocharged cars. The USDM Ecoboost engines are MAP tuned, whereas in the rest of the world they use MAF tuning. This changes the way the ECU meters air going into the motor. In a MAF tuned car, the fuel trims would be affected by venting to atmosphere, however on a MAP tuned car like yours, the ECU is not affected by venting to atmosphere. In short, you've got nothing to worry about!

All of the USDM spec Fords so far use MAP tuning for the ECU where the vehicle doesn't care if you vent to atmosphere or not.
 
OP
OP
Boomba Racing

Boomba Racing

Wildtrak
Well-Known Member
Lux Sponsor (Level 2)
First Name
Boomba Racing
Joined
Jan 12, 2022
Threads
41
Messages
217
Reaction score
293
Location
Wood Dale, IL
Website
www.boombaracing.com
Vehicle(s)
BRONCO
Your Bronco Model
Wildtrak
Will the new PHSSSSS! Noise void the warranty ?
We always recommend to have a good relationship with the dealer that services the vehicle, some dealers are more friendly towards aftermarket parts than others but there really shouldn't be any issues since this product does not change the way the vehicle runs, we have been offering it for a variety of Ford Ecoboost engines for over 8+ years and haven't had any issues.
 

bikearch

Badlands
Well-Known Member
Joined
Oct 15, 2021
Threads
7
Messages
248
Reaction score
360
Location
Los Angeles Ca 91423
Vehicle(s)
2014 camaro
Your Bronco Model
Badlands
Clubs
 
So this product does not increase or do anything other than enhance the "Noise"......What products do you have that will improve prformance?? I assume you have some since you use racing in your company name?.. Thanks
 

Sponsored
OP
OP
Boomba Racing

Boomba Racing

Wildtrak
Well-Known Member
Lux Sponsor (Level 2)
First Name
Boomba Racing
Joined
Jan 12, 2022
Threads
41
Messages
217
Reaction score
293
Location
Wood Dale, IL
Website
www.boombaracing.com
Vehicle(s)
BRONCO
Your Bronco Model
Wildtrak
So this product does not increase or do anything other than enhance the "Noise"......What products do you have that will improve prformance?? I assume you have some since you use racing in your company name?.. Thanks
This is simply for the blow off valve noise aspect, however there is a ton more products we are going to be releasing for the Bronco in the near future.
 

604Bronco

Badlands
Well-Known Member
Joined
Apr 9, 2021
Threads
157
Messages
7,950
Reaction score
27,783
Location
British Columbia
Website
www.bronco6g.com
Vehicle(s)
2021 Ford Bronco
Your Bronco Model
Badlands
Clubs
 
Does this come with a set of "angry eyes" as well?

All joking aside, looks like a good product for those who are interested. Not for me, but welcome to the forum regardless! Looking forward to seeing your other projects in the works.
 

JoeSpeed

Banned
Badlands
Banned
Banned
First Name
Mike
Joined
Apr 19, 2021
Threads
32
Messages
1,028
Reaction score
1,053
Location
Eatontown, Jersey
Vehicle(s)
2dr 2.3 Manual
Your Bronco Model
Badlands
Clubs
 
There is definitely a ton more products we are looking to release for the Bronco platform that is for sure and those are some products we are going to be researching as well!
perfect, cant wait!
 
OP
OP
Boomba Racing

Boomba Racing

Wildtrak
Well-Known Member
Lux Sponsor (Level 2)
First Name
Boomba Racing
Joined
Jan 12, 2022
Threads
41
Messages
217
Reaction score
293
Location
Wood Dale, IL
Website
www.boombaracing.com
Vehicle(s)
BRONCO
Your Bronco Model
Wildtrak
Does this come with a set of "angry eyes" as well?

All joking aside, looks like a good product for those who are interested. Not for me, but welcome to the forum regardless! Looking forward to seeing your other projects in the works.
Thank you for the welcome we appreciate it, there will be many other products we will be releasing for the platform. Everything we manufacture and design happens under one roof right here in the Midwest. We do not outsource our products to anyone. Proudly manufactured in the USA.
 

Frankie945

Base
Well-Known Member
First Name
Frank
Joined
Apr 8, 2021
Threads
34
Messages
628
Reaction score
1,359
Location
Louisville KY
Vehicle(s)
Q50
Your Bronco Model
Base
Clubs
 
Probably a silly question but is there any way to design one where it has the flutter like on a 2jz. That’d be so cool
Sponsored

 
 


Top