- Joined
- Aug 1, 2018
- Threads
- 45
- Messages
- 3,947
- Reaction score
- 8,045
- Location
- Laker Land
- Vehicle(s)
- '11 Mustang GT 5.0
- Your Bronco Model
- Badlands
- Thread starter
- #1
Installed the new BLUMAK3D mud flaps today, wanted to share my experience!
I was fortunate to be selected for the giveaway so they could test their shipping process and fitment.
I was super interested in their product because I am not a big mud flap guy. I like their functionality, but don’t like their looks in general. BLUMAK3D’s appealed to me because the ease of taking them on/off as needed. I’m the type that will probably only put them on for rainy conditions or something.
Install was a breeze other than a stubborn push pin I had on my rock rail lol. I had to use some elbow grease to get it out and that thing launched down my driveway making it difficult to find haha normal install should take 15 mins or less
It came well packaged with instructions:
For Sasquatch Broncos all you need to do is remove 1 push pin, 1 T25 screw, and the end cap on each rock rail. Then slide mud flap on and hand tighten the T30 screw.
Before and After
If you’re interested in these you can order them here:
https://blumak3d.com/products/front-mud-flaps-for-ford-bronco
If you have questions feel free to ask me or reach out to Bryan@blumak3d
I was fortunate to be selected for the giveaway so they could test their shipping process and fitment.
I was super interested in their product because I am not a big mud flap guy. I like their functionality, but don’t like their looks in general. BLUMAK3D’s appealed to me because the ease of taking them on/off as needed. I’m the type that will probably only put them on for rainy conditions or something.
Install was a breeze other than a stubborn push pin I had on my rock rail lol. I had to use some elbow grease to get it out and that thing launched down my driveway making it difficult to find haha normal install should take 15 mins or less
It came well packaged with instructions:
For Sasquatch Broncos all you need to do is remove 1 push pin, 1 T25 screw, and the end cap on each rock rail. Then slide mud flap on and hand tighten the T30 screw.
Before and After
If you’re interested in these you can order them here:
https://blumak3d.com/products/front-mud-flaps-for-ford-bronco
If you have questions feel free to ask me or reach out to Bryan@blumak3d
Sponsored