Bronco Cargo Slide Drawer / Slidefloor by Diabolical Inc

[85crawlrunner]

I meant the roof panels. It would be nice to be able to take them off at will and store them in the drawer under the top without interfering with all the rest of the junk that we carry around on the daily.

Edit to clarify: by "top" I mean the drawer top, which all of your daily junk would be sitting on. So the two front row panels from your hard top could go in the drawer instead of (as you put it) clanging around in the back haphazardly perched on all of your junk. Which is the way I do it now, and it sucks.

I have my entire top off and hoisted to the ceiling including the front panels. Not ignoring the request to try it, just haven’t moved things around to drop it and test…

Sponsored

 

[Lakelife36]

I have my entire top off and hoisted to the ceiling including the front panels. Not ignoring the request to try it, just haven’t moved things around to drop it and test…

All good, it's not quite top off weather around these parts. Feeling close on a sunny Friday afternoon with a beer or two in ya though.

 

[85crawlrunner]

All good, it's not quite top off weather around these parts. Feeling close on a sunny Friday afternoon with a beer or two in ya though.

Ok took me long enough to lower the top and snag the front panels for testing…

You can’t quite fit the panels in there in any configuration. It’s super close but just not quite gonna happen.

I keep short stuff that stays in my vehicle in the drawer and then taller stuff I don’t have anything large that i need in the vehicle all the time that I would have to store up top.

 

[Lakelife36]

Ok took me long enough to lower the top and snag the front panels for testing…

You can’t quite fit the panels in there in any configuration. It’s super close but just not quite gonna happen.

I keep short stuff that stays in my vehicle in the drawer and then taller stuff I don’t have anything large that i need in the vehicle all the time that I would have to store up top.

Ah dagnabit. Thanks a bunch for bringing it down and trying. Out if curiosity was it the height that was the problem or the area on the tray?

@Diabolical Inc the photos above is what I was trying to explain that I was hoping we'd be able to do.

 

[85crawlrunner]

Ah dagnabit. Thanks a bunch for bringing it down and trying. Out if curiosity was it the height that was the problem or the area on the tray?

@Diabolical Inc the photos above is what I was trying to explain that I was hoping we'd be able to do.

In the closest to fitting it was the height.
I’m sure with a couple brackets or some sheet metal with holes drilled where you want them you could very easily raise it and gain the clearance needed.

I bet for under $30 and an extra 20 minutes it’s a piece of cake.

 

[Lakelife36]

In the closest to fitting it was the height.
I’m sure with a couple brackets or some sheet metal with holes drilled where you want them you could very easily raise it and gain the clearance needed.

I bet for under $30 and an extra 20 minutes it’s a piece of cake.

Excellent. Thank you again.

@Diabolical Inc it sounds like great marketing for the next run of these to be ever so slightly taller and fit the roof panels.

 

[Diabolical Inc]

Excellent. Thank you again.

@Diabolical Inc it sounds like great marketing for the next run of these to be ever so slightly taller and fit the roof panels.

That kinda defeats the whole purpose of the drawer.

we get it, people use the bronco in different ways….
The first time a bronco owner dings up their top panels, they will realize they should have just left them at home.

 

[cbs]

I second this

I third this. Two door needs something like this. Take my money. A slide. A platform. A stage. A drawer set. Anything to make it flat with seats laid down.

 

[cbs]

Slide Floor and Slide Drawer top are live on the site for pre-order.

https://shop.diabolicalinc.com/products/bronco-slide-floor

https://shop.diabolicalinc.com/products/slide-floor-cover-bronco

Two door please!!

 

[Diabolical Inc]

Two door please!!

Should have our first prototype by the end of the month!

Sponsored