Bronco on 20×9 BRINK Insurgent Wheels & 35″ Tires

[BRINK Wheels]

No problem! I can attest that these allow 35” tires on a Badlands trim, with or without a lift. I assume the same is true for other trims but I don’t have first hand info.

Thanks for the feedback!

Sponsored

 

[22OBX]

Pardon my ignorance but what is MIC?

Hard top

 

[LostInArizona]

They look like the Badlands non-sas wheels, just bigger.

 

[JaxGtc]

I love the stock look with a bit more aggressive tread. It is a winner! Congratulations.
I wish we could go farther with it. Tall and skinny worked for the 1st Gen, I think it would kill it for the 6th gen.

 

[BroncoJLandCJ]

Saw "20" in the title and thought I was going to hate it. I don't hate it.

It's like you read my mind.

 

[JZZ]

To me, they just look like stock OBX wheels, only bigger. They're okay. Not my style.

Exactly and easily the most taken off set of OEM wheels by looking at eBay or Marketplace

 

[Bad Diamond]

Wheels look great, look like they should have been a factory option unlike all the ungly factory ones offered

 

[Donkeygyrl]

I thought those were the before shots​

 

[mpeugeot]

These rims are sex

behind the dumpster outside of the club...

Ya, not a fan - but don't completely hate them, just not for me.

 

[mpeugeot]

To me, they just look like stock OBX wheels, only bigger. They're okay. Not my style.

MIC = molded in color


It's a MIC hardtop that is what is being referred to previously.

 

[TCC]

Bronco Modular hard top (Molded In Color). They come with a flat grey finish. Very un-G wagon look.

Pardon my ignorance but what is MIC?

 

[Garemlin]

I was expecting something completely different based on the title. But these aren’t bad. A little too stockish but still look good.

 

[BRINK Wheels]

I was expecting something completely different based on the title. But these aren’t bad. A little too stockish but still look good.

Thanks for the feedback!

 

[BRINK Wheels]

Exactly and easily the most taken off set of OEM wheels by looking at eBay or Marketplace

From my decades of experience in the wheel and tire industry most being at the retail level what I learned was that the biggest contributing factory for upgrading wheels was almost always due to customers wanting a more aggressive stance.

The stock OBX wheels are 18x7.5 with a +55 offset which is a similar fitment to what comes stock on most FWD cars these days. Remember that Fords priority isn't how good the stance will look their priority is how much MPG they can achieve.

With that said I could easily see why they'd be the most taken off OEM wheels online. That stock fitment is super conservative! And for many that fitment is totally ok.

Here's how our fitment (Green) will compare to a stock OBX fitment (Orange). This is going conservative on our tire option with a 275/60/20 which is equivalent to a 33x10.8 tire. What I'm mostly demonstrating is the poke.

At present the poke on factory is 40.3mm and on our 20x9 +18 set up it's 96.3. In total our wheels will come out 56mm more than stock which is 2.2".

So for those who like the OBX look and want an enhanced stance, I guess we'll be a good fit.

 

[2020FordRaptor]

Hey Team,

Just wanted to share with you this BRONCO Big Bend with our BRINK Insurgent Wheels ..

Fitment Specifications:
Vehicle: 2022 Ford Bronco Big Bend Edition in Carbonized Grey
Wheels: BRINK B204 Insurgent
Wheel Finish: Smoke Machined Titanium
Wheel Size: 20 x 9.0
Offset: +18
Tires: Cooper Discoverer AT3 XLT
Tire Size: 35×12.50R20
Suspension: 2.0-inch Rough Country Suspension
Other Modifications: Crash bars removed to accommodate 35-inch tires, two-piece BRINK center cap for rear spare wheel.

For those not wanting to remove the crash bars we can accommodate a package with a smaller tire.

Let me know your thoughts, we always enjoy feedback (good and bad)

They look very good!

Sponsored