Broncos will be at Orlando, Florida Auto Show, 12/18-20

[Beach_Bum]

Sponsored

 

[Beach_Bum]

This is from the Orlando Show's facebook page. I'm sure it's at the show. If you look at the background you can see a GMC sign.

It's a shame they didn't leave the purple light in Michigan.

 

[Skunk Ape]

Fingers crossed the full size are there. I’m assuming those going Friday will eagerly update on this thread. I have a three hour ride and planning on running up Saturday. Hopefully I’ll get some sleep on Friday but not likely. I feel like a kid on his first date. No clue what expect but I’m pretty sure I’m a gonna like it ?

 

[Garbone]

Going to probably head over Friday night.

 

[Beach_Bum]

I just bought my tickets. Hopefully, those that are attending Friday will update what is all there to see besides the one posted above. Either way, I'll be going Saturday. Just got back from driving to TX and really wasn't looking to drive any great distance. Orlando isn't that far, but it is far enough.

 

[Administrator]

Video from Orlando Auto Show

https://www.bronco6g.com/forum/thre...de-outside-underbody-orlando-auto-show.10131/

 

[jaruss01]

Got you covered ...

Will look for your feedback. Hopefully they have the OBX fisherman edition. That has a standard duty suspension like the Big Bend, Black Diamond, etc. Keep in mind the OBX tire is 32.1" x 10.0". For guys looking to upgrade to 32.7-33.2" x 11.1-11.2" that means we need at least .6" of additional clearance in ALL areas between the tire and steering knuckle, and .6" vertical clearance from the top of the tire to the bottom lip of the control arm (only if it ends up overlapping the larger tire). Keep that in mind as you photograph, and run you hand behind the tire to get a feel for the steering knuckle.

If you have your fingers in the photos, you could measure the width of your finger with a ruler when you get home so we could back into the dimensions. Ie is the clearance behind the tire one thumb, or an index finger plus a middle finger. Etc. Sounds crazy but thats what I did when I tested out the ranger.

 

[Daytona_Bronco]

Will look for your feedback. Hopefully they have the OBX fisherman edition. That has a standard duty suspension like the Big Bend, Black Diamond, etc. Keep in mind the OBX tire is 32.1" x 10.0". For guys looking to upgrade to 32.7-33.2" x 11.1-11.2" that means we need at least .6" of additional clearance in ALL areas between the tire and steering knuckle, and .6" vertical clearance from the top of the tire to the bottom lip of the control arm (only if it ends up overlapping the larger tire). Keep that in mind as you photograph, and run you hand behind the tire to get a feel for the steering knuckle.

If you have your fingers in the photos, you could measure the width of your finger with a ruler when you get home so we could back into the dimensions. Ie is the clearance behind the tire one thumb, or an index finger plus a middle finger. Etc. Sounds crazy but thats what I did when I tested out the ranger.

En route! .. it better not be roped off for access... the commercial says otherwise. .. if it is I'm going full WWE mode ... off the top rope or from under with a steel chair ...

 

[jaruss01]

En route! .. it better not be roped off for access... the commercial says otherwise. .. if it is I'm going full WWE mode ... off the top rope or from under with a steel chair ...

God speed! Thank you.

 

[Skunk Ape]

En route! .. it better not be roped off for access... the commercial says otherwise. .. if it is I'm going full WWE mode ... off the top rope or from under with a steel chair ...

Please confirm vehicle will be there Sunday prior to being escorted out by security ?

Not looking like I’ll be able to go sooner and would suck if after two hours plus it’s not there. Then security would be showing me where you exited ?

 

[Daytona_Bronco]

Wont let me near it ... so do I go over or under ... ?

 

[Lilj4425]

Somebody create a diversion. Glad I didn’t make the trip now. Guess they don’t want the Bronco to catch the Rona. Gotta keep six feet away. You’d be better off going to Detroit and trying to find one in a random parking lot.

 

[jaruss01]

Ah, not really a lost cause. Getting dimensions on the BL wouldnt be of much help.

 

[indio22]

Will the baby bronco be on display? Just kidding. But it would be nice if this Jimny were offered in the USA. And wouldn't mind Ford offering some Jimny colors on the Bronco.

https://www.topgear.com/car-reviews/suzuki/jimny-0

 

[Skunk Ape]

Wont let me near it ... so do I go over or under ... ?

Looks like I'll be bringing a telescope to get that closer look.

Sponsored