Nice!
Fixed the front weight sag/ rake, added a couple inches up front and leveled out in back with spring replacement.Installed.
These pictures are great. Thank you for posting them.My initial toughts.
Winch mount weighs as much as bumper. Pretty stout.
Workmanship (welds mostly) is about a 7 out of 10.
Heavy. I can feel it on the front end when I took a short drive.
Hoop is really light weight. Mostly for hanging lights.
Will have to add about a foot in front for garage parking!
A bit of a pain to install (gave me wrong size washers for final mounting bolts) Had to drill them out to bigger size.
Will need at least two people to hang it. Three were available to me and made it easy.
I do like that it has frame brackets to mount to and not just the frame horn.
Approach angle has suffered a bit but that goes for any winch mount bumper available.
Intercooler can breath as designed.
Works with plastic skids from base package.
A shitload of hardware and bracketry for license plate, ACC relocate, parking senor harness etc. None of which I needed.
Basically my overall is I think it will work for adding a winch witch was my need. Not fancy or exotic or American made. But was $1264 delivered and fits my Basquatch build very nicely.
Its growing on me and I think I will keep it.
Yes the winch mount can be removed or not installed. Not a 10 minute job though. Remove a couple covers and unbolt the bumper to remove it. Then reverse to reinstall bumper only.
Here some more pics.
This is fantastic. If I had one wish though, there would also be a column to designate rear bumpers with an integral spare tire carrier, versus carrying the spare on the rear tailgate.
Pretty sure that column is included, header title is “tire rack”
Did you ever get this installed?@Bronc69 ~97# for the non winch, which is on par with the Mod bumper since it doesn't have the hoop, wonder if ford includes the shackle mounts in the weight.
ok weights and measures so far on this Scorpion/Barricade/RedRock HD Tubular Front Bumper, just bumper with the short hoop "bullbar" no winch plates/skid/LEDs
hoop is 10#
bumper itself is 49#
--steel between the tubing is .12" / 3.2mm
--steel around the shackle mounts is .2" / 5mm
--tubing is .08" / 2mm (I didn't think to get the ID/OD)
shackle mounts are 11# each
and the box of doodads was 15# including box and packaging
Install will have to wait for my days off so sometime this weekend.
This is 100% the style I’m looking for, wish they had this exact grill guard portion that bolted on to the stock modular bumper!Maxlinder style looks to clear the camera but they are NOT cheap. I think JcrOffroad have similar
Great looking bumper, but it sticks out pretty far. Also, surprised there are no recovery points.
