Stealth wrapWhat did what run? The Bronco or the cover?
Sponsored
Stealth wrapWhat did what run? The Bronco or the cover?
Yes I know there is a section that Badlands doesn't have. Some people claim to still cut the remaining section for more clearance. So no rub lock to lock?? If not that's great!No crash bars on the Badlands to cut or remove
I was looking for that too. I have 20" Fuel Blitz with 35/12.50 Nitto Ridge Grapplers on there and that comes in at around 107 pounds. With the offset and back space it pushes my spare out about 1.5" further away from the gate (looking for a fabricator to either adjust the spare mount or making me a new one to pull it in closer.) I get a good bit of noise from the gate on the trails and will be adding a reinforcement to the gate once I find one I like.Surprised there isn’t a spare tire reinforcement on that with the 37s
$5500 for the stealth wrapStealth wrap
In a previous post he showed he used suction cups.Never mind! Looks like just the standard tonneau cover w/o the ugly straps.
Did you find a solution where you don't need the straps in the back, or did you just take them off for the photoshoot?
That is a sick build! I'd like to do something similar to my BD when I get it. If I ever get it.Larry P's Bronco
2021 Badlands XPEL steal wrapped, 20" Fuel Militia wheels, 37" Nitto Ridge Grapplers, 4" total lift, etc..
Did you stitch the suction cups to the tonneau? How well do they work at freeway speeds?In a previous post he showed he used suction cups.
Hammer built makes a nice one https://hpbuilt.shop/products/hammer-built-bronco-modular-tail-gate-support-systemI was looking for that too. I have 20" Fuel Blitz with 35/12.50 Nitto Ridge Grapplers on there and that comes in at around 107 pounds. With the offset and back space it pushes my spare out about 1.5" further away from the gate (looking for a fabricator to either adjust the spare mount or making me a new one to pull it in closer.) I get a good bit of noise from the gate on the trails and will be adding a reinforcement to the gate once I find one I like.
Good to know… thanks! Wasn’t sold completely on the hammer built, but will check out Texas. Appreciate the info!Hammer built makes a nice one https://hpbuilt.shop/products/hammer-built-bronco-modular-tail-gate-support-system
And so does Texas Complete Bronco https://www.texascompletebronco.com/"
Didn’t link to the product for Texas but they have a nice assortment for the Bronco
drilled 4 small holes under where I cut the straps off. Suction cups have screw posts that I pushed through. used closed end nuts to secure.Did you stitch the suction cups to the tonneau? How well do they work at freeway speeds?
Looks Great....you definitely dropped some $ on this build. In your opinion how does it drive after the mods? I am curious about the 37's impacting performance and mileage ----My 21 bronco feels pretty good with 35's----I am consdering 37's but not sure the stock 2.7 will be okay for city and off road work-----ThanksLarry P's Bronco
2021 Badlands XPEL steal wrapped, 20" Fuel Militia wheels, 37" Nitto Ridge Grapplers, 4" total lift, etc..