- First Name
- Chris
- Joined
- Aug 12, 2021
- Threads
- 95
- Messages
- 472
- Reaction score
- 1,659
- Location
- Fort Myers
- Website
- www.stickerfab.com
- Vehicle(s)
- 2021 Bronco Badlands / 2023 Bronco Raptor
- Your Bronco Model
- Raptor
- Thread starter
- #1
Had to shoot another install video today. Unfortunately many of our customers do not have the same weather as we do in SWFL. Must re-iterate install temps...
This did give me the opportunity to add more items to the Raptor doors though.
Door handles - https://www.stickerfab.com/products/topo-interior-door-handle-overlays-2021-bronco
Upper topo overlays - https://www.stickerfab.com/products...rd-insert-overlays-printed-series-2021-bronco
Front grab handles - https://www.stickerfab.com/products...-overlay-kit-printed-laser-series-2021-bronco
Lower topo overlays - https://www.stickerfab.com/products...rd-insert-overlays-printed-series-2021-bronco
The grab handles are a combination of acrylic to flatten out that area and vinyl to go over it. All of these items are in the generic topo design minus the lower on this vehicle which is topography from Badlands National Park.
These do take a long time to print out because of the combinations. 4 products are seen in the photos below and they can be configured a total of 228 ways! 3 designs x 19 colors x 4 different products.
I think I'll do something for the ABS door bins, but for those that have a normal setup in that area, you can change it up a bit as well:
This is a 2 door panel which we have the lower overlays for. I do need to develop something to fill in the upper areas.
If anyone wants to try out a 2 door overlay which adds contour lines to the painted area, let me know.
This did give me the opportunity to add more items to the Raptor doors though.
Door handles - https://www.stickerfab.com/products/topo-interior-door-handle-overlays-2021-bronco
Upper topo overlays - https://www.stickerfab.com/products...rd-insert-overlays-printed-series-2021-bronco
Front grab handles - https://www.stickerfab.com/products...-overlay-kit-printed-laser-series-2021-bronco
Lower topo overlays - https://www.stickerfab.com/products...rd-insert-overlays-printed-series-2021-bronco
The grab handles are a combination of acrylic to flatten out that area and vinyl to go over it. All of these items are in the generic topo design minus the lower on this vehicle which is topography from Badlands National Park.
These do take a long time to print out because of the combinations. 4 products are seen in the photos below and they can be configured a total of 228 ways! 3 designs x 19 colors x 4 different products.
I think I'll do something for the ABS door bins, but for those that have a normal setup in that area, you can change it up a bit as well:
This is a 2 door panel which we have the lower overlays for. I do need to develop something to fill in the upper areas.
If anyone wants to try out a 2 door overlay which adds contour lines to the painted area, let me know.
Sponsored
