Currently available winch solutions for 2021+ Bronco

[BLMike]

None at all. there is no metal in front of it where it's located. I think the guys with back lit letters might have an issue but that's a conversation for the mall parking lot.
I still need to check the other grille options so far it's been tested with the Badlands/FE grille and performs flawlessly.

Here is a shot of it without the grille and shutters installed.

Thanks for that info super helpful. Is that mounting bracket going to be the one you supply or will it be just another choice? Maybe you can’t even offer it because of liability issues. I’m not sure.

Sponsored

 

[RustysBronco]

Does anyone know know which winch plate/kit this is? It hides away real nice in the capable front bumper.

 

[NOVA Bronco]

Does anyone know know which winch plate/kit this is? It hides away real nice in the capable front bumper.

Is that the Rough Country kit? That is the only company I have seen so far making one like that.

 

[RustysBronco]

Is that the Rough Country kit? That is the only company I have seen so far making one like that.

The Rough Country supposedly won't fit the capable bumper.

 

[NOVA Bronco]

The Rough Country supposedly won't fit the capable bumper.

I’m not sure what kit this is, but if it works with the modular front bumper and the 2.7L engine then I am interested to find out. Like the look and the thought of not swapping the bumper or blocking the camera is a win.

 

[SVCOFFROAD]

I've called or researched a few of these, so I figured I'd include what I've found or heard from folks on these. The main thing I wanted to find out was:

• Lead/wait times as of 10/5
• Compatibility with parking and ACC sensors, front facing camera
• Compatibility with factory skid
• Lighting options

I regret I didn't ask about weight on any of them.

4 Wheel Parts - https://www.4wheelparts.com/p/4-wheel-parts-factory-bronco-front-bumper-61268w/_/R-4WPBR-61268W
$1200 + $400 for the winch plate

• Lead time is 6-8 weeks
• Blocks front facing camera (mostly)
• ACC bracket included that mounts the ACC sensor slightly forward, but in the same location in front of the intercooler
• Works with factory skid
• Cutouts for 6in foglights
• Works with parking sensors

Lifestyle Offroad - https://lifestyleoffroad.com/shop/ols/products/2021-ford-bronco-winch-bumper
$1,965

• Doesn't block camera
• No support for ACC or parking sensors (as of now, they are working to address both of these things and determined to do so)
• Includes replacement skid plate
• No foglights or other lighting options

MaxliderBros - https://shop.maxliderbros.com/colle.../2021-ford-bronco-custom-front-modular-bumper
$3200 + $1229 (for optional brushguard)

• Does not block front facing camera
• Supports factory parking sensors
• Two ACC bracket options: Can be mounted in the bumper or behind the grill with a provided bracket. Some winches won't work with the in bumper mount and require grill mounting, some will allow it to fit in front of the winch.
• Supports ditch lighting
• Includes new skid plate
• Covers crash bars
• 12-14 week lead time
• Made by ADD

ADD - https://www.addictivedesertdesigns.com/ford-bronco-winch-front-bumper
$2400

• May partially block camera
• ACC relocation bracket available to move ACC sensor behind bumper
• More lighting options than other bumpers
• Works with factory skid
• 3-4 month wait
• If you don't want the center light, there is no cover, just a hole

Rough Country - https://www.roughcountry.com/hidden-winch-mount-51054c.html
$309

• Will not fit mod bumper or 2.7l (trans cooler in the way)
• Winch types seem restricted to RC or HF winches only (could be mistaken)
• Places winch behind intercooler
• Replaces factory skid
• No impact on ACC or camera

Ford - https://www.bronco6g.com/forum/threads/ford-accessory-winch-kit-now-available-for-2021-bronco.23033/
$3500 MSRP (looks like you can get it for ~$3k or slightly less)

• Works with mod bumper
• Blocks ACC, camera, and parking sensors
• Winch included
• Factory option, so all wiring/etc is included

Bodyguard - https://www.bodyguardbumpers.com/bronco-base-front-bumper-winch-mount
$1745 (no guard/light), $2020 (guard/light), + other options

• Works with ACC relocation, moves it behind mesh on the bumper
• Lead time is 3-4 weeks as of 10/6
• Camera on the base bumper is not blocked, Baja relocates it
• Works with parking sensors
• Replaces factory skid, 10-ga skid and bumper
• Can use black fasteners instead of silver

Warn Elite - https://www.warn.com/elite-front-bumper-for-2021-ford-bronco-with-grille-guard-tube-107856-2 or https://www.warn.com/elite-front-bumper-for-2021-ford-bronco-no-grille-guard-tube-107870
$1699 w/o guard, $1799 with guard MSRP (cheaper links below via Northridge 4x4)

• Lead/wait times: Sold out the first run, waiting on more to show.
• Compatibility with parking sensors: Yes
• ACC sensors: No
• Front facing camera: Yes w/o guard and relocate control pack.
• Compatibility with factory skid: Yes, you do need to trim in one spot.
• Lighting options: Has pockets for aftermarket fog lights
• Thanks to @Tech Tim for the info, purchasing links in his post (https://www.northridge4x4.com/part/front-bumpers/107856-warn-elite-front-bumper-w-grille-guard or https://www.northridge4x4.com/part/front-bumpers/107870-warn-elite-front-bumper)

ARB Summit (No manufacturer page up yet that I could find, see link below from Northridge)
$1695

• Lead/wait times: Waiting on an ETA from ARB, they should have one soon.
• Compatibility with parking sensors: Yes
• ACC sensors: Yes
• Front facing camera: Yes, but it does block a little (no more info on how much yet)
• Compatibility with factory skid: Yes
• Lighting options: Drilled for aftermarket fog lights
• Bumper to Flare width: ARB split the difference so it will look good on either stock or Sasq.
• Thanks to @Tech Tim for the info, purchasing links through him here -> (https://www.northridge4x4.com/part/front-bumpers/3480010-arb-summit-winch-front-bumper)

Bay Area Metal Fabrications - https://www.bayareametalfab.com/2021-FORD-Bronco-Front-Winch-Bumper_p_169.html
$1700 (various options exist)

• No lead time info currently, preorder starts 11/1/21
• Optional bracket ($159 addon) for relocating parking and ACC sensors
• Front facing camera: No confirmed information yet, but location is similar to those that claim the camera isn't blocked
• Lighting options: Integrated fog light mounts

Current in development (limited details):
Icon - https://www.bronco6g.com/forum/thre...-icon-intro-from-icon-vehicle-dynamics.24784/
https://dv8offroad.com/pages/ford-bronco

I spoke to ADD, Maxlider, and 4WP on the phone, all were responsive and helpful with questions. I similarly emailed with Lifestyle back and forth, who was real helpful with his experiences wheeling the Bronco near me and his plans.

None of the ACC brackets require recalibration according to folks I spoke with, but may require some fiddling with it to get it to work properly. It sounds like you have to "aim" it. I read some forum posts on the F-150 and Ranger that moved it behind the grill, some worked flawlessly while others had on again/off again issues with it. Bodyguard indicated you might have to go to the dealer to have it recalibrated or reflashed, but I doubt that's unique to them.

Most winch mounts that do not block the camera seem to reduce approach angle somewhat.

If I got anything wrong or missed any, let me know, I'll update the post.

EDIT:
Oct 25 - Added info for Bay Area Metal Fabrications

You’ll see ours shortly, we’re test fitting it now on some of our shop Broncos! We’ll provide updates once we get its order and delivery dates firmed up.

Link: https://svcoffroad.com/collections/...cts/svcoffroad-bronco-baja-winch-front-bumper

 

[BLMike]

Does anyone know know which winch plate/kit this is? It hides away real nice in the capable front bumper.

Is that the capable bumper? Looks just like the mod bumper.

 

[RustysBronco]

Is that the capable bumper? Looks just like the mod bumper.

Sorry so many options, I forgot what each is called. You're correct - mod bumper.

 

[Mdh186]

So rough country hidden winch is for the capable bumper, but has been retrofitted to at least one badlands with modular bumper. 2.3L is easier to do it on. Not sure how you access clutch for winch with it back there, but I otherwise like the appearance. I expect functionality is limited and in mud (where winches are most typically used in my experience) it may be better to have it mounted a bit higher. Debating the merits of both approaches.

 

[BLMike]

Sorry so many options, I forgot what each is called. You're correct - mod bumper.

I know! I personally like the look of the mod bumper over the capable bumper. I so hope that something other than the Ford bolt on version comes out by a third party that allows for the lux package. I don’t want to waste a nice bumper!

 

[LSOR]

The Lifestyle Offroad bumper is fully capable with ACC, Camera and front sensors.

Also offering free shop pickup (Saves you some $) and no powder coat options.

2021 Ford Bronco Winch Bumper from Lifestyle Offroad - YouTube

 

[BLMike]

The Lifestyle Offroad bumper is fully capable with ACC, Camera and front sensors.

Also offering free shop pickup (Saves you some $) and no powder coat options.

2021 Ford Bronco Winch Bumper from Lifestyle Offroad - YouTube

Do you happen to have a still shot of the front camera view that you can share please?. Video had some glare in that area.

 

[LSOR]

Do you happen to have a still shot of the front camera view that you can share please?. Video had some glare in that area.

 

[LSOR]

I don’t have anything better. I’ll try and get something this week!

 

[BLMike]

I don’t have anything better. I’ll try and get something this week!

Thanks. No rush.

Sponsored