DIY: Raptor Fog Lights Installed on Standard Bronco

[Ronru]

SPVParts.com has adaptors.
If you want to wire your lights like raptors with one light on each side connected to the fog light switch, use:
2 Pole Molex Connector Adapters to Bronco PREP Fog Connector (Pair) (M
(I have an extra set of these I would be willing to sell)

If you want to tie both lights on each side together use:
2-Way Raptor OEM Fog Connector Splitter (F-150 & Bronco Raptor OEM FOG

Please tell me what you would like to get for your wire set including shipping. Appreciate you pointing me in the right direction.

Sponsored

 

[Ronru]

I'm 99% sure Ford does not make any such part.

Now, what you can get is the Raptor bumper harness that has the 4-pin connectors for the lights, and all the connectors for the park distance sensors. The trouble you'll run into is you'll be missing a circuit at the 10-pin connector where the Raptor bumper harness plugs into the vehicle harness.

The circuit is missing because the Raptors have 2 circuits running to the fog lights. One for the outboard lights which is controlled by the fog lamp switch, and another one that is wired to aux switch 1 for the inboard lights.

Thank for the info, straighten me out on what I though from seeing pictures of the oem Raptor wiring

 

[Ronru]

Can someone please clarify what the factory female connector is behind the modular bumper tow hook. Sorry, I can't conclude from the poss what exactly it is. Thanks.

 

[Neigh]

Can someone please clarify what the factory female connector is behind the modular bumper tow hook. Sorry, I can't conclude from the poss what exactly it is. Thanks.

https://www.bronco6g.com/forum/thre...-light-harness-connectors.105778/post-2405601

 

[Ronru]

Thanks Neigh! I knew I saw it mentioned somewhere, but I've been at so many threads lately, didn't even know where to start search

 

[2023bronco]

I've got Raptor fogs on my '23 Badlands. They are wired to the factory harness and a fog/headlight switch. Bambi mode is disabled. On my '23, there's no option in Forscan to turn on any indicator light in the dash when the fogs are switched on. Not a big deal, but it's weird that there's no ability to enable a dash indicator light.

 

[2door]

I've got Raptor fogs on my '23 Badlands. They are wired to the factory harness and a fog/headlight switch. Bambi mode is disabled. On my '23, there's no option in Forscan to turn on any indicator light in the dash when the fogs are switched on. Not a big deal, but it's weird that there's no ability to enable a dash indicator light.

The fog light indicator should work if you make all the required changes in Forscan.

 

[2023bronco]

The fog light indicator should work if you make all the required changes in Forscan.

Yeah, I can't explain why, but that is not an option in Forscan for my Bronco.

 

[Neigh]

Yeah, I can't explain why, but that is not an option in Forscan for my Bronco.

I assume you're using easy mode? If you go into As-Built mode you should be able to change the config unless the address doesn't even exist for your IPC module.

 

[2023bronco]

I assume you're using easy mode? If you go into As-Built mode you should be able to change the config unless the address doesn't even exist for your IPC module.

I had one of the well-known tuners do the programming for me, and it's the first one they found without the option. So, I assume it's not an easy mode issue.

 

[Neigh]

I had one of the well-known tuners do the programming for me, and it's the first one they found without the option. So, I assume it's not an easy mode issue.

If you're willing to, DM me your VIN. I'd like to download your AsBuilt from Ford and see if the addres 720-01-02 shows for your IPC. The address being completely missing is the only way I can fathom it "not being an option", unless someone was in easy mode.

 

[CarbonGrayBronco]

It's funny how Ford designed these Raptor fog lights. I put them on my non-Sas Badlands, with the four crash bars, and the fog light housing is specifically designed to clear the front two crash bars. There's a sort of notch built into the bottom of the housing. I did have to remove and reinstall the crash bars, but it all fit perfectly. Maybe you could avoid that if you bolt on the bumper ends before you bolt on the housings, I don't know. I bolted everything on as a complete unit.

Clearly, somebody at Ford was thinking that these might be used on non-Raptor and even non-Sas Broncos.

Do you know if the valences from the Raptor bumper clear the crash bars on the non-SAS Badlands? Thinking of adding the Raptor fog lights/bumper valences to my non-SAS Badlands but I'm not sure if they clear the crash bars.

 

[87 Wildtrax]

I have a Set Raptor take off fogs with factory wiring harness and backing shield, if anyone is looking. Pm me I can send you pics. Asking 380

Sponsored