Door Holders Using PVC Pipe -- When Off vehicle

[E_Cups]

Pretty slick. Do you have the design revised for a 2-door setup? Also, have you found anything similar for the roof and roof panels? Thanks!

Sponsored

 

[thattrue32]

B A D



A S S !

 

[hemiblas]

Would probably recommend mounting on 2x4s/plywood to give it a good base for wheels

I havent glued mine together - the full coverage foam is nice!

View attachment 328520

Please orient your photos the correct direction lol. I’m over here staring at this photo wondering how you managed that on a wall.

 

[TX-Hans]

Pretty slick. Do you have the design revised for a 2-door setup? Also, have you found anything similar for the roof and roof panels? Thanks!

I think you could make the verticals higher to clear top of the doors and then put hardtop resting on the top of it all. Might need a little bracing across the top to give the whole thing some rigidity to avoid lateral sway.

 

[CO-Bronco]

I did this as well, added wheels to mine though.

It does take a lot of garage real estate, so I may be looking into a wall mounted storage option soon.

Very interested in finding a wall mount myself.

 

[CO-Bronco]

I'm very interested in a wall mounted option b/c space is so short in my garage... But not the $200 one on Etsy. I think like $80-$120 is a more reasonable price for that... Healthy profit but not losing sight of the fact that it's a small piece of metal with holes in it allowing the wall mount.. haha

Let me know if you find one!

 

[Broncofly]

I found this Door holder idea on the inter webs for a Jeep and decided to utilize the plans for my 4 door bronco.

4 - 10' X1" PVC pipe
 schedule 40
6-1" pipe insulators
 (black foam)
14 - 1" PVC elbows

10 - 1" PVC TEEs
1 - Can of PVC cement

Cut the pipe into 10 - 2 foot sections,
 8 - 4 inch sections, 
and the rest into 1 foot sections. use the images above to copy the assembly. Message me for more info if you have questions.

Continue to rock!!! Well done!

 

[stm378]

Do we think this would be alright to store outdoors (maybe under a deck)?

 

[FlyingScot]

I'm very interested in a wall mounted option b/c space is so short in my garage... But not the $200 one on Etsy. I think like $80-$120 is a more reasonable price for that... Healthy profit but not losing sight of the fact that it's a small piece of metal with holes in it allowing the wall mount.. haha

Very interested in finding a wall mount myself.

Just FYI I talked to Topsy and they are currently working on an Bronco door mount equivalent to the plate they have for the recent Jeeps, can be installed on a cart or wall.

 

[CO-Bronco]

Just FYI I talked to Topsy and they are currently working on an Bronco door mount equivalent to the plate they have for the recent Jeeps, can be installed on a cart or wall.

Epicccccc!!!

 

[GToddC5]

I did this as well, added wheels to mine though.

It does take a lot of garage real estate, so I may be looking into a wall mounted storage option soon.

This is very nice, and I think what you did to secure the rack to the dollies is just fine.

 

[straycat]

Very interested in finding a wall mount myself.

Yeah, was thinking of just using the door storage bags and hang them on the wall, but not sure how durable those bag handles are and if they'd be able to hold the constant weight of the doors. Hopefully something comes out that is durable and won't break the bank.

 

[straycat]

This is very nice, and I think what you did to secure the rack to the dollies is just fine.

Thank you sir. Yeah, if I see any issues with how they're secured to the dollies, I'll figure out a way to bolt them down. But so far so good.

 

[JoeSpeed]

Definitely gonna do this, need a place for my doors this summer

 

[CPTJoe2019]

https://www.harborfreight.com/30-in-x-19-in-1000-lb-capacity-hardwood-dolly-58316.html

Sponsored