You can definitely run the standard flares, but you will be poking a lot. keep in mind he has a First Edition with Sas package and wider flares. I put 8.5 +18 wheels with 315/70r17s on mine and it poked severely (for my taste). I swapped to sas flares and it still pokes, but only a few mm, maybe ~10-15ish. I'm not sure which trim you are getting, but assuming it isnt a sas and has +55 mm offset wheels, dropping to 0 is going to make them poke by about 2 inches over stock, and the wider tire will probably poke and additional inch, or more, past that.They came out great, the painted flares are growing on me - if you don't mind me asking, how much poke did you have with the 8.5 wide wheels, 0 offset and 12.5 tires? it did not look like much and i am hoping to keep the standard flares with 8 inch wide wheels, 0 offset but 11.5 wide tires - so slightly narrower than your original set up
Thanks
A website I like to use is willtheyfit.com. It will tell you exactly how much poke you will have vs the stock setup.
Pic is with sas flares installed.
Sponsored
Last edited: