FIRST LOOK: Flush Style LED Tail Lights for the 2021+ Ford Bronco from ORACLE Lighting

[ORACLE Terry]

https://www.oraclelights.com/products/bronco-flush-tail-lights

https://www.oraclelights.com/produc...-led-module-for-ford-bronco-flush-tail-lights

Sponsored

 

[ORACLE Lighting]

I can't remember, do those work on Bronco's that came with Halogen tails originally?

If you have Halogen lights originally you would need to use ForScan to switch over to LED lights in order to have Amber Turn signals.

 

[redone17]

If you have Halogen lights originally you would need to use ForScan to switch over to LED lights in order to have Amber Turn signals.

Oh, that’s doable now? I thought you originally said that was a dead end and not possible.

 

[ORACLE Lighting]

Oh, that’s doable now? I thought you originally said that was a dead end and not possible.

You will need to confirm that you have wire in the Pin 5 location. Some trims do have the wire some do not. For example the base without LED does not have a wire in this position.

 

[GI_Jo_Nathan]

Oh, that’s doable now? I thought you originally said that was a dead end and not possible.

That's what I understood as well.

You will need to confirm that you have wire in the Pin 5 location. Some trims do have the wire some do not. For example the base without LED does not have a wire in this position.

Ok I'll have to look into that.

 

[Lak34ers]

__________________________________________

UPDATE: Now Available! Visit for more info: www.oraclelights.com/products/bronco-flush-tail-lights
__________________________________________
We are excited to reveal our new "Flush" mount LED tail light design for the new Ford Bronco. Protruding out significantly less than the factory tail lights, this low-profile design helps avoid potential damage while trail riding. These tail lights feature an attractive design and functional LED lighting elements including high-powered reverse lights and unique signature perimeter lighting.

No more problems backing up at night because these LED reverse lights are basically a pair of LED light bars mounted into the tail light which will provide over 8,000 Lumens of rear-facing illumination .

As you can see in the animation below, these lights wrap tightly to the vehicle body providing a "Flush" mount design which not only looks great but is functional as well.

Damaging factory tail lights on trails is not an uncommon issue for owners who often off-road their Broncos. The factory design protrudes out several inches past the body which creates unnecessary exposure to trees, boulders, and other obstacles on tight trails. Example:

The frame of the ORACLE Lighting "Flush" mount LED tail light is tight to the body panel reducing exposure and vulnerability. This difference is demonstrated in the animation below.

Even if you don't off-road your Bronco often these lights provide plenty of innovative features and unique styling which make them an awesome mod for any Bronco Owner!

Questions???

When will they be availble?
Based on our current testing, evaluation, and production plan our target is to start shipping these lights this summer.

Will there be a discount for forum members?
Yes, we are planning to offer a Group Buy discount to forum members who want to pre-order when we get closer to production.

What will the price be?
We are anticipating the price being slightly higher than the similar lights we currently offer for the Jeep Wrangler and Gladiator due to the larger overall size and higher powered LED reverse light but we will be releasing final pricing details soon.

_________________________________________

UPDATE 04/26/2022:
_________________________________________

Here are a few photos from yesterday's off-road beta testing session. These are prototypes not finished parts but already look amazing compared to the factory lights. They look even better in person!

Installed then today. They do look amazing compared to the oem. My wife even commented they look like range rover lights which is a good thing and big compliment from her.

I will say the driver side rubber washers are a joke that come with the lights. To thin and different lengths...they would never be flush and solid. So used the 2 suggested washers from the dorman pack and drilled out the hole with 5/16 bit and it fit perfect. You could probably stack rubber washers as well. Overall well worth the $350 investment and forscan mods are easy just follow the video instructions.

 

[ORACLE Terry]

good input and they look great in your Bronco!!!

 

[ORACLE Lighting]

Great shot from @bradandbronco

 

[techdisaster]

After 14 months my flush mount Oracle lights are misbehaving. The driver side 'C' light won't stay completely lit all the time. Only the top and bottom of the strip light up.

I opened a case with support, but the warranty is technically only a year. Crossing my fingers they can do something for me.

 

[ORACLE Terry]

After 14 months my flush mount Oracle lights are misbehaving. The driver side 'C' light won't stay completely lit all the time. Only the top and bottom of the strip light up.

I opened a case with support, but the warranty is technically only a year. Crossing my fingers they can do something for me.

DM your email address to me so I can follow up with our Customer Support team.

 

[techdisaster]

DM your email address to me so I can follow up with our Customer Support team.

DM sent.

 

[ChrisB351]

DM sent.

My passenger side acted up a couple months ago and I got no help other than them offering to sell me an individual light. Few days after my light started working again but now its acting up again and so is my left. My right side is opposite of what you have and the left looks like yours. Im putting stock back on and throwing these in the trash tonight.

 

[techdisaster]

My passenger side acted up a couple months ago and I got no help other than them offering to sell me an individual light. Few days after my light started working again but now its acting up again and so is my left. My right side is opposite of what you have and the left looks like yours. Im putting stock back on and throwing these in the trash tonight.

I wish I had my factory lights. I got these to replace lights I broke on the trail.

 

[ChrisB351]

That sucks.
I may take these apart and see if they can be repaired. Probably a bad solder joint.

 

[broadicustomworks]

My passenger side acted up a couple months ago and I got no help other than them offering to sell me an individual light. Few days after my light started working again but now its acting up again and so is my left. My right side is opposite of what you have and the left looks like yours. Im putting stock back on and throwing these in the trash tonight.

I still have mine in the box where they went out at about 14 months as well.
Can't bring myself to trash them yet.
I keep thinking I'll look into them one day or rob the reverse light portion for some sort of cargo light setup or something...

Sponsored