- First Name
- RTR
- Joined
- Sep 23, 2022
- Threads
- 44
- Messages
- 170
- Reaction score
- 734
- Location
- Concord, NC.
- Website
- www.rtrvehicles.com
- Vehicle(s)
- Bronco RTR
- Your Bronco Model
- Raptor
- Thread starter
- #1
Enhance the performance of your 2.3L or 2.7L engine in your 2021-2022 Bronco, with a Ford Performance Calibration. The team at Ford Performance has engineered and dyno-tested a calibration that delivers the Ford Performance promise of more power and increased performance without sacrificing reliability. This part does not have regulatory approval for use in California and can not legally be registered or used on vehicles in California. The use of this product in California may subject the user to penalty provisions under California law.
Product Features:
- ProCal 4 Handheld Calibration Device
- OBD II Port Connector
- Windshield Suction Cup Mount
- USB to MicroUSB cable
Ready to increase the performance of your Ford Bronco? Click HERE for more info!
***Calibration and ProCal 4 tool are VIN locked. Please contact Ford Performance Tech Line with additional questions***
***NOTE*** ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode".
***NOTE*** ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect the tool to your PC periodically to receive the updates automatically.
Product Features:
- Improved throttle response throughout the RPM range
- Optimized shift schedule for Broncos equipped with automatic transmissions
- Down-shift rev-matching for manual transmission-equipped vehicles
- Ability to change tire size up to 37" (Additional modifications may be required)
- Ability to change axle ratio up to 4.70
- For U.S. and Canadian vehicles only
- 3-year/36k mile warranty from new vehicle in-service when installed by a Ford dealer or ASE/Red Seal certified technician
- CARB E.O. #: D-431-4 for 2021MY vehicles
- Not available for 2022MY vehicles in California
- ProCal 4 delivery tool included
- * Premium fuel required*
- Stock HP/TQ - 300HP/325LB-FT TQ
- Peak power = 330 HP at 5,500 RPM
- Peak torque = 385 lb.-ft. at 3,500 RPM
- Stock HP/TQ - 330HP/410LB-FT TQ
- Peak power - 355HP at 5,500 RPM
- Peak torque = 433 lb.-ft. at 3,500 RPM
- ProCal 4 Handheld Calibration Device
- OBD II Port Connector
- Windshield Suction Cup Mount
- USB to MicroUSB cable
Ready to increase the performance of your Ford Bronco? Click HERE for more info!
***Calibration and ProCal 4 tool are VIN locked. Please contact Ford Performance Tech Line with additional questions***
***NOTE*** ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode".
***NOTE*** ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect the tool to your PC periodically to receive the updates automatically.
Sponsored