- First Name
- Jake
- Joined
- Oct 22, 2021
- Threads
- 446
- Messages
- 992
- Reaction score
- 716
- Location
- West Palm Beach, FL
- Vehicle(s)
- 2022 F-150 RCSB 5.0
- Your Bronco Model
- First Edition
- Thread starter
- #1
Looking to add more power to our Bronco WITH a Warranty?? No look further!
The Ford Performance Calibration w/ ProCal 4 Calibration is your go to!
The Ford Performance engineered and dyno tested calibration delivers the Ford Performance promise of more power and increased performance without sacrificing reliability.The Ford Performance Calibration w/ ProCal 4 Calibration is your go to!
For the 2.7L
- Improved throttle response throughout RPM range
- Optimized shift schedule
- Peak torque = 433 lb.-ft. at 3,500 RPM
- Peak power = 355 HP at 5,500 RPM
- Ability to change tire size up to BFG 37x12.5R17 KO2 (579 revolutions per mile). [Additional modifications required.]
- Ability to change axle ratio up to 4.70
- For U.S. and Canadian vehicles
- 3 year/36k mile warranty from new vehicle in-service when installed by a Ford dealer or ASE/Red Seal certified technician
- CARB E.O. #: D-431-4 for 2021MY vehicles
- Not available in California for 2022MY vehicles
- M-12655-F ProCal 4 delivery tool included
- * Premium fuel required*
***Calibration and ProCal 4 tool are VIN locked. Please contact the Tech Line with additional questions***
***NOTE*** ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode".
***NOTE*** ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically.
Check it out here --> Ford Performance Calibration w/ ProCal 4 Calibration Delivery Tool (2021-2022 Bronco 2.7L)
For the 2.3L
Improved throttle response throughout RPM range
- Optimized shift schedule for automatic transmission equipped vehicles
- Down-shift rev matching for manual transmission equipped vehicles
- Peak torque = 385 lb.-ft. at 3,500 RPM
- Peak power = 330 HP at 5,500 RPM
- Ability to change tire size up to BFG 37x12.5R17 KO2 size (579 revolutions per mile) [Additional modifications required.]
- Ability to change axle ratio up to 4.70
- For U.S. and Canadian vehicles
- 3 year/36k mile warranty from new vehicle in-service when installed by a Ford dealer or ASE/Red Seal certified technician
- CARB E.O. #: D-431-4 for 2021 model year vehicles
- Not available for 2022 model year vehicles in California
- M-12655-F ProCal 4 delivery tool included
- * Premium fuel required*
***NOTE*** ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode".
***NOTE*** ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically.
***NOTE*** This Item cannot be returned
Check it out here --> Ford Performance Calibration w/ ProCal 4 Calibration Delivery Tool (2021-2022 Bronco 2.3L)
As always, if you guys have any questions feel free to reach out to any one of us here at Lethal Performance and we'll be more than happy to assist!
As always, if you guys have any questions feel free to reach out to any one of us here at Lethal Performance and we'll be more than happy to assist!
Sponsored