- First Name
- Jared
- Joined
- Jul 14, 2020
- Threads
- 210
- Messages
- 1,258
- Reaction score
- 1,860
- Location
- South Florida
- Website
- www.lethalperformance.com
- Vehicle(s)
- 2020 First Edtion 2.7L / 2020 Shelby GT500 CF
- Your Bronco Model
- Raptor
- Thread starter
- #1
Hey Y'All!
Today your LAST CHANCE to save BIG on the Ford Performance Calibration Kits with the ProCal 4 Device!
IF you haven't already seen, these Calibration Kits are the best way to bump your Bronco's power, improve shift points, calibrate for larger wheels and different gear ratios, unlock features, and more!
ALL WHILE KEEPING YOUR FACTORY WARRANTY!
Here's a better run down of the specs and gains you'll see!
2.3L
New Updated Features added to BOTH applications!
Today your LAST CHANCE to save BIG on the Ford Performance Calibration Kits with the ProCal 4 Device!
IF you haven't already seen, these Calibration Kits are the best way to bump your Bronco's power, improve shift points, calibrate for larger wheels and different gear ratios, unlock features, and more!
ALL WHILE KEEPING YOUR FACTORY WARRANTY!
Here's a better run down of the specs and gains you'll see!
2.3L
- Peak torque = 385 lb.-ft. at 3,500 RPM
- Peak power = 330 HP at 5,500 RPM
- Improved throttle response throughout RPM range
- Down-shift rev matching for manual transmission equipped vehicles
- Peak torque = 433 lb.-ft. at 3,500 RPM
- Peak power = 355 HP at 5,500 RPM
- Improved throttle response throughout RPM range
- Optimized shift schedule
New Updated Features added to BOTH applications!
- Ability to change axle/FDU ratio up to 5.38
- Enables upgrade of M190 to M210 front drive unit by reconfiguring DLCM module
Sponsored