Ford ProCal is now 50 State CARB approved!!

[lethaljake]

Hey, #teamlethal fans!

Great news Bronco Owners of all years!
The Ford ProCal that you all know and love is officially 50 State CARB approved!

If you're not familiar, here's a quick breakdown:

​

Features:
Improved throttle response throughout RPM range
Optimized shift schedule

( 2.7L ) Peak torque = 433 lb.-ft. at 3,500 RPM
Peak power = 355 HP at 5,500 RPM

( 2.3L ) Peak torque = 385 lb.-ft. at 3,500 RPM
Peak power = 330 HP at 5,500 RPM
Ability to change tire size up to BFG 37x12.5R17 KO2 (579 revolutions per mile). [Additional modifications required.]
Ability to change axle ratio/FDU up to 5.38
Enables upgrade of M190 to M210 front drive unit by reconfiguring DLCM module
For U.S. and Canadian vehicles
3 year/36k mile warranty from new vehicle in-service when installed by a Ford dealer or ASE/Red Seal certified technician
CARB E.O. #: D-431-4 for 2021-2024 model year vehicles
M-12655-F ProCal 4 delivery tool included
* Premium fuel required*

***NOTE***
-Reverting to stock calibration with non-production tires/gears will result in error codes. Loss of functionality of critical systems may occur
-Calibration and ProCal 4 tool are VIN locked. Please contact the Tech Line with additional questions
-ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically.
-ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode
-THIS ITEM CANNOT BE RETURNED

Sponsored