Going Wednesday to see Broncos in MKE, any requests?

[Scott2373]

Is the drain hole big enough to pee out of or do you need to make a funnel?

Mod #1 coming up!

Sponsored

 

[Phosvitin]

I'm jealous, working in Madison all day so can't go but please take lots of pictures!

 

[jkburg]

So in a bit of cruel irony, I just found out that my wife tested positive for COVID so now I have to quarantine and therefore miss the event this Wednesday. I am.... (words can't describe but they do involve a lot of 4 letters). Sorry guys.

 

[mljohnson1973]

Can you show the recline on the rear seats by putting one all the way up and one all the way back? (4 door)

I'm looking to swap out the rear Ford logo for a "blacked out" version . I know it's pinned in and can't just be "debadged" so I need a replacement, could you please measure it , height and width so I know what size to order. I forgot to do that at my event. I'd truly appreciate it.

 

[Scott1911]

If they have any hardtops, how about a picture of the front of the top with the front panels removed.

 

[Prkelly]

I'm looking to swap out the rear Ford logo for a "blacked out" version . I know it's pinned in and can't just be "debadged" so I need a replacement, could you please measure it , height and width so I know what size to order. I forgot to do that at my event. I'd truly appreciate it.

It was approx 2x5” slight indent it rests in

 

[Prkelly]

Is there any other place to mount a 12"x6" plate on the front (plastic or modular) bumpers that wont block the parking/active cruise sensors?

I was thinking something like this could be an option but adding a bracket to the tow hook you could then 'float' a license plate frame in this position but i'm not sure how large this space is. if you go off road you could then just undo the bracket so that plate comes off and doesnt get damaged by a rock.

I did not see too many places because of the radar and sensors. If centered it looks like it will need to be set to the back in order to to clear the camera. There will probably be a bracket that uses the bolts to hang in that location

 

[Prkelly]

The height from ground to seat on NON SQUATCH, we’ve got a 4 dr OBX with the standard wheels. Just trying to give her a comparison to her current ride. That would be great, thanks

It was approx 35” from ground to center of seat. 36 to 34 front to back of seat

 

[Wookiee]

So in a bit of cruel irony, I just found out that my wife tested positive for COVID so now I have to quarantine and therefore miss the event this Wednesday. I am.... (words can't describe but they do involve a lot of 4 letters). Sorry guys.

Very sorry to hear that. Stay safe and hope all works out

 

[Wookiee]

It was approx 35” from ground to center of seat. 36 to 34 front to back of seat

Thank you so much for that

 

[DeltaBravo]

still looking for the length of the roof on the 2 door

 

[Seacat]

Please measure the distance from the farthest left side of the steering wheel to the driver's B pillar.

 

[JesseS]

So in a bit of cruel irony, I just found out that my wife tested positive for COVID so now I have to quarantine and therefore miss the event this Wednesday. I am.... (words can't describe but they do involve a lot of 4 letters). Sorry guys.

Sorry to hear that, my entire Iowa family had it, parents really bad, kids not so much. here is hoping she has a mild case and recovers quickly, stay safe.

 

[jh3113]

Where in Milwaukee will it be?!

 

[*T2*]

So in a bit of cruel irony, I just found out that my wife tested positive for COVID so now I have to quarantine and therefore miss the event this Wednesday. I am.... (words can't describe but they do involve a lot of 4 letters). Sorry guys.

Mobile quarantine device.....using a tape measure might prove challenging though.

Sponsored