GoRhino D6 Steps and Mudflaps, Anyone done it?

[MacDonald_Photo]

As the title suggests, I am looking to see if anyone with GoRhino D6 steps has installed any sort of mudflap yet?
Would love to hear what you went with and how the install was.
Photo because my Bronc is a narcissist.

Sponsored

 

[Clem]

I have the Go Rhino side steps/rails or whatever they call them and the auto store mud flaps. I only put one extra hole on each side of the vehicle to mount the flaps. Factory holes were used for the remainder of mounting points. I can hear the rocks pinging on those hollow tubes and it sounds better than the thump from hitting the doors. Now I don't really mind scratches and whatnot on my off road vehicle but I'd rather have it happen while doing something cooler than leaving the parking lot at work.

 

[Clem]

 

[MacDonald_Photo]

Hey thanks for sharing this!
Just what I needed to see.
Now it's off to the parts store!

 

[TX-Hans]

@Clem and @MacDonald_Photo Are you finding that you are still getting rocks flung up from the tires and hitting the body side panels even with the Go Rhino D6 boards on the Bronco?

 

[MacDonald_Photo]

@Clem and @MacDonald_Photo Are you finding that you are still getting rocks flung up from the tires and hitting the body side panels even with the Go Rhino D6 boards on the Bronco?

FAR FAR fewer with the D6s installed for sure!!
Now it's more about the mud flinging up the doors for me....Hence the mudflaps.

 

[Clem]

@TX-Hans I've only noticed two hitting the truck in about 2 weeks.
The plastic rivet that holds the front inner fender was long enough to re use through the flap and inner fender. I had to use longer screws in the existing holes for the tiny stock rear mud flap to get enough bite to hold the rear in place.

 

[RyanP]

FAR FAR fewer with the D6s installed for sure!!
Now it's more about the mud flinging up the doors for me....Hence the mudflaps.

did the mud flaps fit with the D6 or did you have to modify anything?

 

[Bt_ostate]

did the mud flaps fit with the D6 or did you have to modify anything?

I have the d6 boards and gatorback flaps and had zero issues with them working and fitting together. No adjustments needed on a sasquatch.

 

[MacDonald_Photo]

That looks so good!!!
Thank you for the info!!

 

[vegetarianbarbarian]

I have the d6 boards and gatorback flaps and had zero issues with them working and fitting together. No adjustments needed on a sasquatch.

these look awesome. Do you have something else mounted to the pinch seam?

do these mount to the wholes in the seem and where OeM steps are mounted?
Thanks

 

[RyanP]

I have the d6 boards and gatorback flaps and had zero issues with them working and fitting together. No adjustments needed on a sasquatch.

Looks amazing! Well done with the photo tops, thanks.

 

[vegetarianbarbarian]

Sorry to pile on.

Will the GoRhino D6s work with the Ford $50 mudflaps?

thanks

 

[RClark82]

DSS with Ford mudflaps. No cutting required for the step. Cutting required for fenders w/ Sasquatch.

 

[Ironiguana]

I have the d6 boards and gatorback flaps and had zero issues with them working and fitting together. No adjustments needed on a sasquatch.

Where did you get bronco gas door sticker? I like it

Sponsored