- Joined
- Feb 26, 2021
- Threads
- 69
- Messages
- 225
- Reaction score
- 363
- Location
- Silverdale, WA
- Vehicle(s)
- Lots of Jeeps and one lone Bronco (so far)
- Your Bronco Model
- Base
- Thread starter
- #1
Sponsored
Yeah just slap this puppy inline and go nutsThis looks like a good product, but my dealer filled my tires with pure Nitrogen(tm), are you guys working on a compressor that only compresses nitrogen?
You're a lifesaver!Yeah just slap this puppy inline and go nuts
https://www.alibaba.com/product-det...tml?spm=a2700.pccps_detail.0.0.694f13a0XmO51K
I've been told I'm empty inside, now it all makes senseYou're a lifesaver!
Great video! Thanks!
The outside air is typically made up of 78% nitrogen, so just fill up your tires as normal, but then take out about 20% of the air and you should be left with just nitrogen in your tires. Oxygen is heavier than nitrogen, so position your valve stem at the bottom of the tire to more effectively drain the non-nitrogen parts.This looks like a good product, but my dealer filled my tires with pure Nitrogen(tm), are you guys working on a compressor that only compresses nitrogen?
Damn, that's some fat-brained wisdom right there.The outside air is typically made up of 78% nitrogen, so just fill up your tires as normal, but then take out about 20% of the air and you should be left with just nitrogen in your tires. Oxygen is heavier than nitrogen, so position your valve stem at the bottom of the tire to more effectively drain the non-nitrogen parts.
That Nitro membrane @Tex posted up might be your hot ticket.... Report back with your findings.This looks like a good product, but my dealer filled my tires with pure Nitrogen(tm), are you guys working on a compressor that only compresses nitrogen?
As far as the compressor itself, they don't care what position they are ran in.Are there any benefits to mounting the compressor vertically vs horizontal like other mounts? Aesthetics?
That Nitro membrane @Tex posted up might be your hot ticket.... Report back with your findings.
If you're serious about the Nitrogen fill, maybe take a look at a Power Tank set-up and get the local gas shop to fill the tank with N.