Grocery Gitter Broncos - Bag Handles To 3D Print

[ANTNY]

LOL, thought I'd have some fun. Grocery Bag Packers.

2dr and 4dr versions

I printed the 2dr version for example.

The 2dr print holding 2 gallons of water.

DOWNLOAD The .STL files from Dropbox

DOWNLOAD The .STL files from my personal webspace

I printed in ABS with 2 shells, 0.25mm layer height, 2mm solid top and bottom and 35% infill.

If you print any, post 'em up!

Sponsored

 

[Notmattwong]

I need like three of these in each hand when I bring my groceries in. #TeamOneTrip

 

[DC9atnight]

I don’t want to get us all fighting again but 2dr is really the only true grocery bag holder. Putting my fingers through that 4dr seems like it would hurt

 

[F OR D]

more bags fit on 4d right?

any constraints on the 2d beyond finger holes?

thanks!

edit do you have a sas one for more bags/bigger tires?

 

[Tiltovich]

Looks clean, I hope that you trained your grip good enough. For people who don't like to make more than one run with the bags when they come from grocery, that's a perfect decision. It reduces the time by a lot and it makes it easier to carry the bags. I am using this website where you can design your own custom flat barrier pouch bags, it's amazing to have such an option. Not only that you can make the bags of desired size, but also you can choose how they will look, which makes it even more fun.

 

[Beach_Bum]

@shoelessjoe Scott, don't you have a 3-D printer? If so, you may be interested in the files.

 

[shoelessjoe]

@shoelessjoe Scott, don't you have a 3-D printer? If so, you may be interested in the files.

Thanks

Sponsored