HAVOC Steel Bender Front Bumper Installed

[FatRat250]

Havoc. Done and done.
reused factory fog lights. I’m going to switch to rigid or diode dynamics fogs. Parking sonars triggered until I went and perfectly centered the sonar in the hole with my finger. Mounted four rigid 366 inch lights on the two lighting tabs by making a custom mount.

FYI, havoc bumper directions show mounting the factory fog lights behind the brackets. I suggest mounting them in front of the brackets, closer to the bumper, so they sit closer to the opening. They sit too deep/further back in the opening do light spread is reduced.

Sponsored

 

[Gtrekker]

Havoc. Done and done.
reused factory fog lights. I’m going to switch to rigid or diode dynamics fogs. Parking sonars triggered until I went and perfectly centered the sonar in the hole with my finger. Mounted four rigid 366 inch lights on the two lighting tabs by making a custom mount.

FYI, havoc bumper directions show mounting the factory fog lights behind the brackets. I suggest mounting them in front of the brackets, closer to the bumper, so they sit closer to the opening. They sit too deep/further back in the opening do light spread is reduced.

Nicely done!!!

FYI - I'm dropping the bumper and looking to see if there is enough clearance to mod the mounting bracket to raise the bumper up and close the gap between the bumper and lower grill. If interested...

Happy Holidays!!!

 

[FatRat250]

Nicely done!!!

FYI - I'm dropping the bumper and looking to see if there is enough clearance to mod the mounting bracket to raise the bumper up and close the gap between the bumper and lower grill. If interested...

Happy Holidays!!!

interested to see your mod - let me know how it turns out.

 

[Lakelife36]

@FatRat250 that looks really good! Can you post a sideview too? I'd love to see how the bull bar looks compared to the grille and hooks. Yours has the bumper extenders right? Would you recommend to hid the crash bar mounts? And last question - about how much does it weigh?

 

[FatRat250]

@FatRat250 that looks really good! Can you post a sideview too? I'd love to see how the bull bar looks compared to the grille and hooks. Yours has the bumper extenders right? Would you recommend to hid the crash bar mounts? And last question - about how much does it weigh?

i’m on the road right now, but will post when I return home. this is all I have on my phone at the moment, but you can see a little bit of the front. And yes, I would recommend hiding the crash bar mounts. I’m looking for a solution to that problem myself. I did mount the extenders below.

 

[smast]

Here's a side view

 

[Gtrekker]

@FatRat250 that looks really good! Can you post a sideview too? I'd love to see how the bull bar looks compared to the grille and hooks. Yours has the bumper extenders right? Would you recommend to hid the crash bar mounts? And last question - about how much does it weigh?

Hey, at the airport but, I had the same question when I installed mine from others....

I still have the OEM skid plates installed.

 

[JD11937]

Alright, you guys convinced me, placed my order. Was trying to hold out for the fun-haver bumper release but the havoc bumper really ticks all the boxes. They are having a little sale right now if anyone is on the fence.

 

[Lakelife36]

Has anyone gotten Havoc products shipped to Canada? They don't do it themselves and said I'd need to use a freight forwarding service, but don't have any recommendations.

 

[FatRat250]

Has anyone gotten Havoc products shipped to Canada? They don't do it themselves and said I'd need to use a freight forwarding service, but don't have any recommendations.

I have not Had one sent to Canada, however one that I received was destroyed in shipping. The freight company damaged it so badly that the bumper was sticking out of the box and had been scratched and banged up. Also a lot of the hardware disappeared. I assume it’s because the weight that when they transport it it gets thrown around and abused. Hopefully you can find a quality shipper that’ll take care of your item.

 

[sedge16]

Hey, at the airport but, I had the same question when I installed mine from others....

I still have the OEM skid plates installed.

 

[sedge16]

Hey, at the airport but, I had the same question when I installed mine from others....

I still have the OEM skid plates installed.

I installed same bumper. Can you include the link to the 20” light bar you installed and the side brackets that you used to install it? Thanks

 

[Gtrekker]

I installed same bumper. Can you include the link to the 20” light bar you installed and the side brackets that you used to install it? Thanks

Replied to your DM... Here is the link for the post.

Fyi... I used different bracket then the ones that came with the light.

https://a.co/d/7ZGSqFV

 

[Drive&Fish]

 

[Gtrekker]

Well done sir!!!

Sponsored