Here's the 2021 Bronco's Tail Light Shape Illuminated

[Serengeti]

Enough already Ford,this is torture! With all this build up over the last three years this better be damn good Ford. Anticipation has gotten the best of me.

Sponsored

 

[SpursFan]

I don't get why people think there's no rear fender? It just has a load of camo hiding it like the front end.

Agree. If anything's missing it would just be some sort of flare. Things looking bad ass!

Edit...it's not even missing a flare you can see the matching lines.

 

[Paint]

Yeah...rear fender is just as far out as the front one. It's just got padding above it hiding the curve/body lines.

 

[Nickp]

All I know is that boi is fuckin T H I C C

 

[Nickp]

Btw... one of our math wizards wanna try and get the width from outside edge of taillight-outside edge of taillight?

 

[Carolina Jim]

All I know is that boi is fuckin T H I C C

Agree....makes me wonder 2 things

1. if the spare is mounted directly on a swing gate, think of the arc required to open that door. Could the spare be on a separate holder??
2. If overall length comes close to Wrangler's 166.8", is this puppy going to look too much like a cube?

 

[Escape_Artist]

What if we aren't seeing the whole taillight and it is in the shape of a B...

Damn Ford is in 3020

 

[Stampede.Offroad]

Btw... one of our math wizards wanna try and get the width from outside edge of taillight-outside edge of taillight?

Using both a 17" wheel on the spare and a 12" license plate I get ~63" for the outer edges of the taillights.

I was not expecting the cabin to be the same width as a Wrangler.

ETA: that makes the track width 74" too

 

[Nickp]

What if we aren't seeing the whole taillight and it is in the shape of a B...

Damn Ford is in 3020

ronco

 

[Nickp]

Using both a 17" wheel on the spare and a 12" license plate I get ~63" for the outer edges of the taillights.

I was not expecting the cabin to be the same width as a Wrangler.

ETA: that makes the track width 74" too

Dang. Very very interesting. Thanks!

 

[Paint]

Using both a 17" wheel on the spare and a 12" license plate I get ~63" for the outer edges of the taillights.

I was not expecting the cabin to be the same width as a Wrangler.

ETA: that makes the track width 74" too

Just going off the plate, I got 61.5* wide to the outer lit portions of taillights.

*Does not take into account the angle...Which would increase the width by at least an inch and a half if perspective was dead-on.

 

[Stampede.Offroad]

Using both a 17" wheel on the spare and a 12" license plate I get ~63" for the outer edges of the taillights.

I was not expecting the cabin to be the same width as a Wrangler.

ETA: that makes the track width 74" too

We didn't even bother to ask this question before, we had all assumed it would have a wider cabin than a Wrangler. So I dug up another image with much better resolution, clarity, and less of an angle. Same results. ~63" body, 74" outer track width

.

.

 

[Paint]

We didn't even bother to ask this question before, we had all assumed it would have a wider cabin than a Wrangler. So I dug up another image with much better resolution, clarity, and less of an angle. Same results. ~63" body, 74" outer track width

.

.

On this one I got 73.3 outside of tire to outside of tire, and 66.5ish for the lower-outside corners of the white mesh covering the tails. I'm not accounting for the angle.

Also...From the bottom of the tire to the to the top of the (padded) roof, I got aboot 75.5"

 

[Southern Girl]

We really are desperate...

haha I just showed this to my husband and said the same thing

 

[TopRecon]

What if we aren't seeing the whole taillight and it is in the shape of a B...

Damn Ford is in 3020

Based on the concept art it actually is.

Sponsored