IAG LED interior lights and cup holders!

[Wamland]

Nevermind. Easy enough install. The clips are a little bit of a pain first time but slipping the back piece off and then screwing the base in worked without issue.
Daily driver with 5 people sometimes as well as occasional off road this is perfect

great job again @IAG Performance

Sponsored

 

[Eroc88]

@IAG Performance when will the interior lights be available?

 

[IAG Performance]

@IAG Performance when will the interior lights be available?

These are in development and should be ready in the next few months!

 

[Cfield90]

Nevermind. Easy enough install. The clips are a little bit of a pain first time but slipping the back piece off and then screwing the base in worked without issue.
Daily driver with 5 people sometimes as well as occasional off road this is perfect

great job again @IAG Performance

Somebody ship Will some seat covers and floor mats

 

[Wamland]

Somebody ship Will some seat covers and floor mats

Right?!? After every trip with the dog.

 

[Cfield90]

Right?!? After every trip with the dog.

A vacuum’s nightmare!

If I didn’t already have the OEM mats, I would have gone with @Mabett

I did get his rear seat mats, and they’re awesome!

 

[doccoch]

I'm pretty sure these lights are the same that amazon has for 10 bucks. But their custom mount might be worth it???

https://www.amazon.com/License-Wate...824-919a-90160ebf1688&pd_rd_i=B0813HRPY6&th=1

 

[broadicustomworks]

Right?!? After every trip with the dog.

It gets everywhere, even short-haired breeds.
Man what a mess.
I was about to ask if you slaughtered a badger in there or something. Then I recognized the trusty ole' pet hair look. We have a Chihuahua/Dachshund mix, still find hair in places she's never been around in the house.

*Cupholders look good, btw.

 

[RedHotFuzz]

Nevermind. Easy enough install. The clips are a little bit of a pain first time but slipping the back piece off and then screwing the base in worked without issue.
Daily driver with 5 people sometimes as well as occasional off road this is perfect

great job again @IAG Performance

These photos gave me an asthma attack.

 

[Ksjrb03]

I'm pretty sure these lights are the same that amazon has for 10 bucks. But their custom mount might be worth it???

https://www.amazon.com/License-Wate...824-919a-90160ebf1688&pd_rd_i=B0813HRPY6&th=1

The main hurdle to adding additional dome lighting is tying into the factory LIN-BUS circuit. It’s impossible right now. They claim to have a solution to that. That would be the reason to use their lighting kit, who wants to control additional interior lighting with an AUX switch.

 

[Natai]

I'm pretty sure these lights are the same that amazon has for 10 bucks. But their custom mount might be worth it???

https://www.amazon.com/License-Wate...824-919a-90160ebf1688&pd_rd_i=B0813HRPY6&th=1

Depends on what the final design looks like. They may well have used those Amazon lights for proof of concept.

Getting an OEM-like look with an easy installation that works regardless of top (especially important that lights are both waterproof and do not have issues baking in the sun), plus detailed instructions for wiring them into the interior lighting, could easily be worth a higher price point.

 

[doccoch]

The main hurdle to adding additional dome lighting is tying into the factory LIN-BUS circuit. It’s impossible right now. They claim to have a solution to that. That would be the reason to use their lighting kit, who wants to control additional interior lighting with an AUX switch.

I'm fine using an aux switch. I'm using this method now and just use the far right aux switch and have four rock lights like this. It works great. It looks very good, but if it looked super custom and was quality, I might switch to theirs since I've wired everything already. But I used high-quality Baja Designs lights. If they were to use good lights, I might change them out, and put my Baja's somewhere else.

 

[Wamland]

These photos gave me an asthma attack.

the culprit

 

[Ksjrb03]

I'm fine using an aux switch. I'm using this method now and just use the far right aux switch and have four rock lights like this. It works great. It looks very good, but if it looked super custom and was quality, I might switch to theirs since I've wired everything already. But I used high-quality Baja Designs lights. If they were to use good lights, I might change them out, and put my Baja's somewhere else.

It sounds like your not the target audience then. You can easily throw any 12v lights up there and turn them on with a switch after Bronco is on. The real deal is having actual usable light when you unlock/open doors etc. The integration won’t be cheap.

 

[scojosmac]

@IAG Performance - I have your cup holders and all weather mats.

looks like you need to pop over the panel to remove the floor mats after install?

not ideal

Sponsored