IAG LED interior lights and cup holders!

[IAG Support]

@IAG Performance - I have your cup holders and all weather mats.

looks like you need to pop over the panel to remove the floor mats after install?

not ideal

Thank you for your feedback, but we recommend doing it this way in order to prevent bending of the bracket.

Sponsored

 

[rtazz17]

Yeah thats why I wont buy this. Im not taking apart the cup

@IAG Performance - I have your cup holders and all weather mats.

looks like you need to pop over the panel to remove the floor mats after install?

not ideal

Yeah thats why I wont buy this. Im not taking apart the cup holder to wash my mats off. I dont know how else they couldve done it securely but I bought bigger pockets for rear doors that hold bottles easily And other things.

 

[scojosmac]

Yeah thats why I wont buy this. Im not taking apart the cup

Yeah thats why I wont buy this. Im not taking apart the cup holder to wash my mats off. I dont know how else they couldve done it securely but I bought bigger pockets for rear doors that hold bottles easily And other things.

Yea. I wish I would have known / waited prior to impulse buying

 

[Razorback]

@IAG Performance - I have your cup holders and all weather mats.

looks like you need to pop over the panel to remove the floor mats after install?

not ideal

Is this model specific? Badlands just has 2 rear driver and passanger floor mats that this shouldn't interfer with. Do some just have a single mat that stretches the length of rear floor board?

 

[Bigeffr]

It is the OEM rubber mat that form fits over the hump and has a Bronco on it.

 

[Cfield90]

Update on the cup holders and rear passengers: even though they are aware the cup holder can pop off, the teens have unseated it 3xs at this point. It’s mostly on ingress, but if full of cups with liquid, not ideal. Thank goodness for wash out floors and rubber floor mats!

@IAG Support and @IAG Performance any plans on maybe strengthening the magnet? I really think that would do the trick. Of course that likely means a new mold. Contemplating a return at this point.

 

[Aurongel]

Any ETA on when the dome lights are going up for sale? I’m definitely interested in them as long as they’re durable and there are clear instructions on how to perform the wiring. The idea of prying apart the plastic trim up near the side curtain airbags scares me quite a bit.

 

[22BlackDiamondGreen]

Thank you for your feedback, but we recommend doing it this way in order to prevent bending of the bracket.

could a stronger magnet hold through the mates?

 

[Brouha]

Update on the cup holders and rear passengers: even though they are aware the cup holder can pop off, the teens have unseated it 3xs at this point. It’s mostly on ingress, but if full of cups with liquid, not ideal. Thank goodness for wash out floors and rubber floor mats!

@IAG Support and @IAG Performance any plans on maybe strengthening the magnet? I really think that would do the trick. Of course that likely means a new mold. Contemplating a return at this point.

I'll second the need for a stronger magnet. Especially when the bracket is installed over the rubber floor mats. The cupholder has come loose a few times when loaded with a water bottle. I've thought of trimming the mat so that it isn't under the bracket anymore, but I'm not sure I want to do that yet.

 

[refade1]

when are the side steps going to be available for the rock rails?

 

[Bigeffr]

when are the side steps going to be available for the rock rails?

I installed a set last week on my 4 door

 

[refade1]

I installed a set last week on my 4 door

how did it come out?

 

[Bigeffr]

Came out pretty awesome...super easy to put on and if you need to take off for the trails takes about 5 minutes or less. The 3 five footers in the house thank me

 

[IAG Support]

could a stronger magnet hold through the mates?

We have a few changes that we will be making. If you are having issues, please reach out to our customer service, and we will take care of it for you.

 

[tobyw]

Thank you for your feedback, but we recommend doing it this way in order to prevent bending of the bracket.

Can you elaborate a bit on this? I attempted the install this weekend with the OEM mat (the one with the raised lip and Bronco horse emblem, and it's a non-starter?

Sorry for the crummy pictures, but the lip and the emblem prevent the console from snapping back in place, and if you try to put the IAG bracket below the floor liner, the Bronco emblem prevents the cupholders from engaging the bracket/magnet... Is there a v2.0 coming out that works with the OEM mats?

Sponsored