- First Name
- Ryan
- Joined
- Nov 17, 2020
- Threads
- 11
- Messages
- 406
- Reaction score
- 1,752
- Location
- Zachary, Louisiana
- Vehicle(s)
- 2013 F150 Eco SCREW 4WD
- Your Bronco Model
- Badlands
- Thread starter
- #1
In my own search for a mod bumper winch mount I saw others asking if the IAG mount was compatible with the Apex Badland 12k. The answer is NO and YES, depending on how much you want to modify the mount and/or winch. You can see I had to grind two areas: the fairlead gusset and the backside of the bullbar. I would rather not have removed so much material from the bull bar but still plenty strong for what it does. Hope this helps others decide which direction they want to go. If IAG is listening, it really would be some minor adjustments (bull bar lean forward 1/2” more, gussets contoured slightly) to make this winch compatible. But I understand, design, tooling, manufacturing etc is more complicated than I could probably imagine. Anyway, all that said, I am happy with using this mount as a starting point. I could never fab to the same quality as the base and the two bolt on recovery points that replace OEM and form the mounting points for the winch plate. I may cut the bull bar off completely at some point and fab my own stinger or whatever. And I Will have to relocate front camera (100% blocked) and 2 middle parking sensors.
Sponsored