ICON Alloys - Current List of Bronco Compatible Wheels

[Dusty at ICON]

So today I looked at Icons website and it says that your Bronco has the +25?
Is that correct? Even with the standard flares in the pictures it looks like the wheels stick out pretty far. more like a zero offset.Unless it’s just an illusion? Because I was thinking about getting the +25 for my BaseSquatch and going with Nitto ridge grappler to push the tire out a little bit because I don’t like the narrow 9.5 tread of the stock Sasquatch wranglers.
I can’t find the specs of the actual tread width on a 315/70 ridge grappler? Section 12.7 but not tread. I know it’s a hell of a lot wider than the wranglers.
Thoughts thanks
I am interested in the compression in a +25 or zero

Yeah mine are +25, unless they pulled a fast one on me LOL. So they stick out about a 1/4" farther than the Sasquatch wheels, which are +30mm. Remember, my Bronco has standard flares so both the Sasquatch wheels and the +25mm Rebound Pros have some significant poke. I did actually have the Sasquatch wheels on mine for a short time so I looked for a pair of photos that were similar, to compare the two. These aren't the best angle for judging poke but you can sort of get an idea.

OE Sasquatch wheels 17X8.5 +30mm and tires 315/70R17 on a Base 2-Door Bronco with standard flares (non-Sasquatch) and 3/2 level-lift:

Rebound Pros 17X8.5 +25mm with 35X12.50R17 Nitto Trail Grapplers on the same Bronco:

I guess I really do need to start taking more pictures on level ground and in parking lots and driveways LOL.

Sponsored

 

[Aguelian]

Hey folks I thought it might be helpful to list all of ICON's Bronco-compatible wheels in one place. Here is every wheel that ICON currently offers that fits the 2021+ Ford Bronco. New styles, sizes and offsets are introduced regularly so I'll try to keep this list updated. Some notes:

• FINISH: The finishes (colors) are listed in the table in the same order they are shown in the images (left-to-right).
• OFFSET: Factory Sasquatch wheels are 17 X 8.5 with 30mm offset. ICON wheels with 25mm offset will put the outside of the wheel about 1/4" wider than the Sasquatch wheel. The ICON 0mm offset wheels will place the outside of the tire approximately 1-1/4" wider than the Sasquatch wheel.
• HUB BORE: All of the wheels listed here will fit and work correctly with your Bronco's hubs. The Hub Bore column simply denotes which part numbers will be hub-centric (93.1mm bore) and which will be lug-centric (anything larger) in the way they attach and center onto the hub. If you're not familiar with those terms, don't worry, it won't affect fitment or function, either mounting method works fine.
• PART NUMBERS are included so you may inquire directly with your favorite Authorized ICON Dealer with a specific part number in hand when checking price and availability.
• This list includes ICON's 17" wheels only, at this time. I will update it soon with 18" and 20" Bronco-compatible part numbers.

REBOUND PRO 17 X 8.5
With patented InnerLock Bead Retention Technology - More Info in This Thread

FINISH	BACKSPACE	OFFSET	HUB BORE	LOAD RATING	PART #
SAT BLACK	4.75"	0mm	106.1mm	3200 LBS	21817858347SB
BRONZE	4.75"	0mm	106.1mm	3200 LBS	21817858347BR
TITANIUM	4.75"	0mm	106.1mm	3200 LBS	21817858347TT
SAT BLACK	5.75"	25mm	93.1mm	3200 LBS	21817858357SB*
BRONZE	5.75"	25mm	93.1mm	3200 LBS	21817858357BR*
TITANIUM	5.75"	25mm	93.1mm	3200 LBS	21817858357TT*

*Not yet available to order directly from ICON but may be ordered through most ICON Dealers (you may have to contact them to order, as these might not be added to their websites yet).

REBOUND 17 X 8.5

FINISH	BACKSPACE	OFFSET	HUB BORE	LOAD RATING	PART #
SAT BLACK	4.75"	0mm	106.1mm	2750 LBS	1817858347SB
BRONZE	4.75"	0mm	106.1mm	2750 LBS	1817858347BR
TITANIUM	4.75"	0mm	106.1mm	2750 LBS	1817858347TT
SAT BLACK	5.75"	25mm	93.1mm	2750 LBS	1817858357SB
BRONZE	5.75"	25mm	93.1mm	2750 LBS	1817858357BR
TITANIUM	5.75"	25mm	93.1mm	2750 LBS	1817858357TT

COMPRESSION 17 X 8.5

FINISH	BACKSPACE	OFFSET	HUB BORE	LOAD RATING	PART #
SAT BLACK	4.75"	0mm	106.1mm	2750 LBS	2017858347SB
BRONZE	4.75"	0mm	106.1mm	2750 LBS	2017858347BR
TITANIUM	4.75"	0mm	106.1mm	2750 LBS	2017858347TT
SAT BLACK	5.75"	25mm	93.1mm	2750 LBS	2017858357SB
BRONZE	5.75"	25mm	93.1mm	2750 LBS	2017858357BR
TITANIUM	5.75"	25mm	93.1mm	2750 LBS	2017858357TT

VECTOR 6 17 X 8.5

FINISH	BACKSPACE	OFFSET	HUB BORE	LOAD RATING	PART #
SAT BLACK	4.75"	0mm	106.1mm	2750 LBS	2417858347SB
BRONZE	4.75"	0mm	106.1mm	2750 LBS	2417858347BR
TITANIUM	4.75"	0mm	106.1mm	2750 LBS	2417858347TT
SAT BLACK	5.75"	25mm	93.1mm	2750 LBS	2417858357SB
BRONZE	5.75"	25mm	93.1mm	2750 LBS	2417858357BR
TITANIUM	5.75"	25mm	93.1mm	2750 LBS	2417858357TT

ALPHA 17 X 8.5

FINISH	BACKSPACE	OFFSET	HUB BORE	LOAD RATING	PART #
SAT BLACK	4.75"	0mm	106.1mm	2500 LBS	1217858347SB
GUN METAL	4.75"	0mm	106.1mm	2500 LBS	1217858347GM
BRONZE	4.75"	0mm	106.1mm	2500 LBS	1217858347BR
TITANIUM	4.75"	0mm	106.1mm	2500 LBS	1217858347TT
SAT BLK/MACHINED	4.75"	0mm	106.1mm	2500 LBS	1217858347MB

SIX SPEED 17 X 8.5

FINISH	BACKSPACE	OFFSET	HUB BORE	LOAD RATING	PART #
SAT BLACK	4.75"	0mm	108mm	2500 LBS	1417858347SB
GUN METAL	4.75"	0mm	108mm	2500 LBS	1417858347GM
BRONZE	4.75"	0mm	108mm	2500 LBS	1417858347BR
TITANIUM	4.75"	0mm	108mm	2500 LBS	1417858347TT
SAT BLK/MACH	4.75"	0mm	108mm	2500 LBS	1417858347MB
SAT BLACK	5.75"	25mm	108.1mm	2500 LBS	1417858357SB
BRONZE	5.75"	25mm	108.1mm	2500 LBS	1417858357BR
TITANIUM	5.75"	25mm	108.1mm	2500 LBS	1417858357TT

THRUST 17 X 8.5

FINISH	BACKSPACE	OFFSET	HUB BORE	LOAD RATING	PART #
SAT BLACK	4.75"	0mm	106.1mm	2750 LBS	2817858347SB
SMK SAT BLACK	4.75"	0mm	106.1mm	2750 LBS	2817858347SSBT
SAT BLACK	5.75"	25mm	93.1mm	3200 LBS	2817858357SB
SMK SAT BLACK	5.75"	25mm	93.1mm	3200 LBS	2817858357SSBT

COMPASS 17 X 8.5

FINISH	BACKSPACE	OFFSET	HUB BORE	LOAD RATING	PART #
SAT BLACK	4.75"	0mm	106.1mm	2750 LBS	3217858347SB
SAT BRASS	4.75"	0mm	106.1mm	2750 LBS	3217858347BS

RAIDER 17 X 8.5

FINISH	BACKSPACE	OFFSET	HUB BORE	LOAD RATING	PART #
SAT BLACK	4.75"	0mm	106.1mm	2750 LBS	3417858347SB
SAT BRASS	4.75"	0mm	106.1mm	2750 LBS	3417858347BS
TITANIUM	4.75"	0mm	106.1mm	2750 LBS	3417858347TT

VICTORY 17 X 8.5

FINISH	BACKSPACE	OFFSET	HUB BORE	LOAD RATING	PART #
SMK SAT BLACK	4.75"	0mm	106.1mm	2750 LBS	3017858347SBT
SAT BLACK RED	4.75"	0mm	106.1mm	2750 LBS	3017858347SBRT

Hello, do you know which offset is in this pic?

 

[T1B]

Whats the status with a 0mm wheel on a sas? Any rubbing at all? Stock tires, stock everything else. Will it rub? Can I have full articulation? What about city driving like driveways, reverse and turning etc. Cheers!

 

[bstottlemyer85]

looking to get the same tires and wheels but maybe in Bronze but what did the wheels and tires end up costing you.

What I paid for the the whole set up:

Icon - Sun Stoppers	Rebound Pro 17x9 0mm ($320x5)	$1,600.00
Nitto - Sun Stoppers	Ridge Grappler 35/12.50/17 ($336 x5)	$1,680.00
- Sun Stoppers	TPMS Sensors (x5)	$187.00
	Lug Nuts (x5 sets)	$50.00

Total: $3,517

 

[ryannshit]

2021 Badlands -Non-Sasquatch - Not Lifted
Icon Rebound Pro

21817858347SB

17x8.50"

6x5.5

4.750"

0mm

106.10mm

3200 lbs

32 lbs

SATIN BLACK

Nitto Ridge Grappler 35x12.50R17LT E 121Q

Just ordered the same tires and wheels but with the bronze Rebounds for my Badlands.

You didn't need to install a lift or leveling kit?

How about a tire reinforcement for the spare in the back?

Any chance you have a pic of your beast from the front?

Apologies in advance for all the questions

 

[Dusty at ICON]

Hello, do you know which offset is in this pic?

I'm pretty sure those are the +25mm offset Rebound (not Rebound PRO), listed HERE.

 

[Dusty at ICON]

Here are some nice shots of a Carbonized Gray 4-door on ICON Alloys Six Speed wheels in bronze. Thanks to our friends at Joe’s House of Speed for the pics.

 

[Aguelian]

I'm pretty sure those are the +25mm offset Rebound (not Rebound PRO), listed HERE.

I got them

 

[Aguelian]

I got them

0 offset

 

[Dusty at ICON]

I got them

Very nice!

 

[Slyder]

Here are some nice shots of a Carbonized Gray 4-door on ICON Alloys Six Speed wheels in bronze. Thanks to our friends at Joe’s House of Speed for the pics.

I hope someone puts one of Icon's bronze and titanium colored wheels on a Hot Pepper Red to see if it compliments it or looks a bit out of place. I plan on Icon wheels, once/if the Bronco ever gets built, and would prefer to not get black.
(Bronze wheels come in enough different shades that not all look good against some vehicle colors)

 

[Dusty at ICON]

I hope someone puts one of Icon's bronze and titanium colored wheels on a Hot Pepper Red to see if it compliments it or looks a bit out of place. I plan on Icon wheels, once/if the Bronco ever gets built, and would prefer to not get black.
(Bronze wheels come in enough different shades that not all look good against some vehicle colors)

I have seen one photo of a 4-door in Rapid Red (I think, it might be Race red but it's shot in low light so not exactly sure) with our Rebound PROs in bronze, and it looks really good. It was posted in the Bronco B.A.B.E.S. Facebook Group. I have messaged the poster to ask permission to use her photo. If she grants it I'll copy it here. If you are a member of that group you could look for it there.

 

[ryannshit]

I ordered the rebounds in bronze for my wrapped matte green Badlands.. nervous to see how it will turn out and they won't arrive for a few weeks.

If there are any Eruption green pics anywhere out there with bronze icons let me know! Think it will give me a decent idea.

 

[Slyder]

I have seen one photo of a 4-door in Rapid Red (I think, it might be Race red but it's shot in low light so not exactly sure) with our Rebound PROs in bronze, and it looks really good. It was posted in the Bronco B.A.B.E.S. Facebook Group. I have messaged the poster to ask permission to use her photo. If she grants it I'll copy it here. If you are a member of that group you could look for it there.

I think I've seen that one. Yeah, Bronze goes well with both Rapid Red and Race Red.

Hot Pepper Red is a bit different in that it's more of a burnt orange metallic in most lighting and angles and only resembles Rapid Red under certain conditions.

 

[Dusty at ICON]

I think I've seen that one. Yeah, Bronze goes well with both Rapid Red and Race Red.

Hot Pepper Red is a bit different in that it's more of a burnt orange metallic in most lighting and angles and only resembles Rapid Red under certain conditions.

Yeah I only mentioned it as a "this is as close as I can get" to showing our bronze on any red Bronco. I know Hot Pepper Red is a bit of an anomaly, plus it's still new and rare. But If I see any pics of that specific combo out in the wild I'll see if I can borrow them for this thread.

Sponsored