ARB Compressor Engine Bay Mount from KR Off-Road (NOW SHPIPING)

[4x4TruckLEDs.com]

Kits are in stock. Orders in by 12PM (EST) ship the same day typically!

https://www.4x4truckleds.com/kr-off-road-arb-compressor-engine-bay-mount-for-2021-ford-bronco/

Use coupon code BRONCO6G and save 10%

If you've been looking for an easy to install mount for your ARB Single or Twin Compressor, look no further. KR Off-Road were the first in the industry to offer a commercially available ARB mount for the new 2021+ Ford Broncos. This system is 100% bolt-on and uses factory mounting points. With support for both 2.3L and 2.7L engines you'll be able to mount the ARB Single Compressor or the ARB Twin Compressor under the hood of your vehicle.

This mounting platform is the easiest system out there right now when it comes to mounting a compressor under your hood.

(PATENT PENDING)

FEATURES

• .135" (10 Gauge) #304 Stainless Steel
• Powder Coated Black Finish
• Designed & Manufactured in the USA

INCLUDES

• 1 Bracket w/Support Bar

FITMENT

• 2021+ Ford Bronco w/2.3L Engine
• 2021+ Ford Bronco w/2.7L Engine

WARRANTY
Lifetime Warranty for the original owner.

OPTIONAL COMPRESSORS
ARB Air Compressors provide many advantages when exploring the great outdoors. Whether for inflating tires and camping accessories, running air tools, activating Air Lockers® or even re-seating a tire onto a wheel, there’s a model available to suit your needs. Designed to withstand the harshest environments, each ARB Air Compressor is individually leak tested, current draw tested and flow tested under heavy load at the factory before packing. For total peace of mind, all ARB Compressors come with a comprehensive 2-year warranty. To further increase longevity, ARB Compressors are also rebuildable, with spare parts readily available from our extensive network of ARB authorized dealers.

https://www.4x4truckleds.com/kr-off-road-arb-compressor-engine-bay-mount-for-2021-ford-bronco/

Sponsored

 

[Theherofails]

Is that attached to the front shock mount for the bottom support? I have the 2.7 and don't remember seeing that location..

 

[4x4TruckLEDs.com]

Is that attached to the front shock mount for the bottom support? I have the 2.7 and don't remember seeing that location..

Yes it is. It uses one of the bolts. Mine look different because we just did a lift on the truck a few days ago, but this was designed off the factory mounts. You just loosen one of the bolts, slide in the support bracket, re-tighten it down.

 

[BroncoKong Jr.]

Great work!

Now someone get this man a 2.7 ASAP!

 

[FourHorses]

One of the advantages of the 2.3L. So much space to do ingenious things under the hood. Good work.

 

[Craig Cameron]

In your response to the other dude's post from a few days ago you said you were quite confident that you already had a solution for the 2.7, but you just weren't ready to share it yet. You had said that you were just needing to see if you could use the same bracket in both engine compartments.

Did you test fit it with a borrowed vehicle in order to determine fitment?

 

[4x4TruckLEDs.com]

In your response to the other dude's post from a few days ago you said you were quite confident that you already had a solution for the 2.7, but you just weren't ready to share it yet. You had said that you were just needing to see if you could use the same bracket in both engine compartments.

Did you test fit it with a borrowed vehicle in order to determine fitment?

UPDATE: These fit both the 2.3L and 2.7L engines!

No

" Right now these only fit the 2.3L engines. The 2.7L has more stuff going on under the hood, so we need to get our hands on a 2.7L in person to see what we need to modify. "

Know anybody on Long Island with a 2.7

 

[West1]

So some of you know we've been hinting at an ARB mount for our Broncos for a while now. Well we're finally about ready to roll into production. We did a test fit today of our brackets and they fit great. So the next step is to have our laser cutter give us a set in stainless steel for a final test fitment. From there, we'll begin taking orders.

Right now these only fit the 2.3L engines. The 2.7L has more stuff going on under the hood, so we need to get our hands on a 2.7L in person to see what we need to modify.

This is a 100% bolt on kit. What you see here is our aluminum sample but the final product will be stainless steel (and powder coated black, because that's just how we do things).

You may need to adjust the air compressor so the hose comes off at an angle instead of straight up, but ARB has designed their compressor to allow you to do this for this exact reason.



View attachment 204764

View attachment 204765

Support structure
View attachment 204767

Nice job, from a 2.3 future owner.

 

[Jr87mustang]

Looks awesome, can't wait for it!

 

[acetdeucy]

So some of you know we've been hinting at an ARB mount for our Broncos for a while now. Well we're finally about ready to roll into production. We did a test fit today of our brackets and they fit great. So the next step is to have our laser cutter give us a set in stainless steel for a final test fitment. From there, we'll begin taking orders.

Right now these only fit the 2.3L engines. The 2.7L has more stuff going on under the hood, so we need to get our hands on a 2.7L in person to see what we need to modify.

This is a 100% bolt on kit. What you see here is our aluminum sample but the final product will be stainless steel (and powder coated black, because that's just how we do things).

You may need to adjust the air compressor so the hose comes off at an angle instead of straight up, but ARB has designed their compressor to allow you to do this for this exact reason.



View attachment 204764

View attachment 204765

Support structure
View attachment 204767

Well, it looks GREAT!!!

I hope that you will also make a mount available, for a single compressor installation!

 

[4x4TruckLEDs.com]

Well, it looks GREAT!!!

I hope that you will also make a mount available, for a single compressor installation!

It's already built into this design. It supports single and dual compressors. I'm not going to have a different SKU for singles, so it'll fit the same platform (extra holes)

 

[Boston182]

There is no way there isn't a 2.7 owner in New York on this forum.

Strike a deal: Borrow the bronco for prototyping, free compressor/mount?

 

[helifino16]

I’d like to be a Guinea pig when my Wildtrak shows up. Not sure if you wanna wait about 6 weeks (which may be WILDLY optimistic).

Oh hey @4x4TruckLEDs.com, really like the demo. Good job! Can’t wait to see it in person.

 

[jonesh242]

Love this! Super clean. I'm gonna need the 2.7 setup however. Looking forward to what you come up for that application. Cheers.

 

[hellahella]

If you put a hole under that wiper fluid reservoir, people can probably add a support to relieve that ziptie holding it lol

Sponsored