More pics please!! Looks amazing!For those of you pondering wheel spacers, these are super high-quality, fit perfectly, zero issues driving at any speed. I have never run spacers, but figured to take a shot after reading many posts on this forum that had positive results. Here is what the poke looks like, stock Wildtrak rims with 37x12.5 BFGāsā¦nice subtle stance!
Sorry for the crappy pictures, it has been pouring all day!
No lift, no rub (no rub even before the BORAās). Completely stock wildtrak suspension (Hoss 2.0). The 37ā BFGās run a bit small (36.5) so there may be issues with other brands that measure to a truer 37. But I only have been on the street so far. I have a 2ā perch collar lift going on soon.
Side view pic?Sorry for the crappy pictures, it has been pouring all day!
No lift, no rub (no rub even before the BORAās). Completely stock wildtrak suspension (Hoss 2.0). The 37ā BFGās run a bit small (36.5) so there may be issues with other brands that measure to a truer 37. But I only have been on the street so far. I have a 2ā perch collar lift going on soon.
I chose the BFGās because Iāve had them before with good luck, they are a three peak mountain rated tire for snow, and it is the OE tire they use on the raptors. Also one of the few (may be the only??) 37 inch tires with C load ratingā¦
Love the setup, certainly changes the look!For those of you pondering wheel spacers, these are super high-quality, fit perfectly, zero issues driving at any speed. I have never run spacers, but figured to take a shot after reading many posts on this forum that had positive results. Here is what the poke looks like, stock Wildtrak rims with 37x12.5 BFGāsā¦nice subtle stance!
I was told by Bora that these, due to their shape, should work. Only concern that was highlighted by another member is not getting a full 7 turns on the lugs in the front. I have these on order, I'll keep you posted if they work. Orion, what setup are you running? Looks like you've still got your steelies. What tires? Spacers?
35-10.50R17 Kenda Klever RT with 1.25 spacers. So thinner spacers just go over the existing lugs then, makes sense.
I put Bora 1" spacers all around on my non-Sas Black Diamond with stock steelies in preparation for updating my 33" tires to 35". I was concerned with rubbing on the upper control arm. Don't have the tires yet to confirm it will clear, but I'm pretty confident it will. The spacers are very high quality...and being only 1", I did have to grind a bit off the top of the stud.
That looks great! I have the very same tire and wheel setup and was seriously considered 1.25 Borlas. Do you have a pic that shows the poke?35-10.50R17 Kenda Klever RT with 1.25 spacers. So thinner spacers just go over the existing lugs then, makes sense.
