- Thread starter
- #1
Picked up a set of pods for the a pillars from @4x4TruckLEDs.com. Been wanting to try these new 4Bangers since seeing them at SEMA last year and I'm definitely impressed. Only 3 LEDs in each pod yet brighter than many 4 diode pods. These things pack a serious punch for their size, like a pocket-sized light bar. These are the COMBO beam.
A word of advice if anyone else gets these, grab a couple washers or replacement bolts for the mounts ahead of time. The slot in them is way bigger than the factory "Bronco bolts". I luckily had some black washers on hand, but I'll probably swap out for a longer bolt at some point.
And now for the good stuff...
Low beams only
Low+Highs
All 3. I have the pods aimed pretty straight ahead right now so there's a lot of overlap and they basically drown out the headlights.
Pods only!
Pods only without the light on the horizon... hard to get true darkness during summer in AK.
A word of advice if anyone else gets these, grab a couple washers or replacement bolts for the mounts ahead of time. The slot in them is way bigger than the factory "Bronco bolts". I luckily had some black washers on hand, but I'll probably swap out for a longer bolt at some point.
And now for the good stuff...
Low beams only
Low+Highs
All 3. I have the pods aimed pretty straight ahead right now so there's a lot of overlap and they basically drown out the headlights.
Pods only!
Pods only without the light on the horizon... hard to get true darkness during summer in AK.
Sponsored
Last edited: