Is anyone debadging or rebadging their Bronco?

[nwGTS]

I did not paint the flares.

Oh wow. Must be a trick of the light then. Nevermind.

Sponsored

 

[Fonz54]

It's practically the first thing I did to my OBX.

On the Tom's website it says these come with clips. Did you have to drill holes or did you use double sided tape?

 

[mpeugeot]

On the Tom's website it says these come with clips. Did you have to drill holes or did you use double sided tape?

Tape

 

[Fonz54]

Tape

Thanks

 

[ANTNY]

I would be forever grateful to someone with 3-D printing/design skills, who can create a version of this badge with a “III” in place of the “II”.

I have debated whether it would be possible to buy three badges and poach one of the “I”

Figured I'd give it a go. This is not an exact copy, just as close as I could get by looking at internet images. You should be able to get some local nerdy type(s) to 3D print or "Glow Forge" this. I can easily modify this file if need be, just let me know.
Good Luck! And post up if you get 'em made!!

CLICK ME to download the .stl file (File updated 01-17-2023)

Image of the file as seen in my maker program.

 

[GPPBronco]

Figured I'd give it a go. This is not an exact copy, just as close as I could get by looking at internet images. You should be able to get some local nerdy type(s) to 3D print or "Glow Forge" this. I can easily modify this file if need be, just let me know.
Good Luck! And post up if you get 'em made!!

CLICK ME to download the .stl file

Image of the file as seen in my maker program.
View attachment 449367

Whaaaaaaaaat!? that’s incredible, thank you. My wife is a public library in and they just installed a 3-D printer for public use at a local branch library. I might give that a try.

 

[JZZ]

Found these on Etsy

 

[Markco]

I'm disappointed that the trim badge is just a sticker. I'm thinking about taking mine off. Does anyone else feel the same way?

If someone makes a 3D badge for each trim, I may consider replacing it with that.

I added OEM Bronco emblem (cut pins off and applied 3M tape), relocated BD sticker to rear window. It looks great.

 

[Markco]

Isn't the Ford badge indented and mounted with posts in holes?

Cut pins off and use 3M double side tape. A little tricky to trim tape with an X-Acto knife.

 

[broncoj11]

Has anyone done a metal badge of the original sticker? Would love that

 

[Markco]

Apply heat to loosen the adhesive, then carefully peel off. Some people use a string to get behind the sticker and sever the adhesive without scratching the paint.

Dental floss works great.

 

[BroncoSarge]

Took my Badlands badges off long ago.

 

[IsThisThingOn]

 

[HtownBronco07]

At first I was gonna go with the classic badge but I ended up going with badgeslide, came with the 3M tape.

I think they turned out pretty nice.

 

[JonD]

I did and put on the stickers on glove box and one below bronco on tail gate

Sponsored