J Tops USA Bimini Solution Hitting the Market Soon

[JTopsUSA]

Will there be provisions for the Bestop Soft top setup? I know there is a lot of extra hardware up top on those.

Not sure what you mean about the “provisions for the Bestop? “ Can you clarify?
Mike

Sponsored

 

[Bullet42]

You only take the side bracket off when you first install. Then it’s reinstalled. You actually don’t have to take it off. You can stretch the binding over bracket but it’s easier to just take it off and then put it right back on.
I hopes this helps.
Mike

Thank you. Obviously mine has not been delivered. Thank you for explaining. My dealer kept theirs on. Sounded better since you didn’t have to take it off.

 

[STX Bronco]

Not sure what you mean about the “provisions for the Bestop? “ Can you clarify?
Mike

Talking about the 2 Door. From the install vids I have seen there is hardware added on the top of the roll bars.

 

[Bullet42]

You only take the side bracket off when you first install. Then it’s reinstalled. You actually don’t have to take it off. You can stretch the binding over bracket but it’s easier to just take it off and then put it right back on.
I hopes this helps.
Mike

Thank you for explaining.

 

[Bullet42]

No, that is not correct. It works the same way with the Bimini on. The soft top will still function the same.

Thank you

 

[Bullet42]

You only take the side bracket off when you first install. Then it’s reinstalled. You actually don’t have to take it off. You can stretch the binding over bracket but it’s easier to just take it off and then put it right back on.
I hopes this helps.
Mike

Thank You

 

[JTopsUSA]

Talking about the 2 Door. From the install vids I have seen there is hardware added on the top of the roll bars.

We will not use any extra hardware! Everything will be incorporated into the shade.
We are working on final versions of the 4 and 2 door hardtop solutions next week.
Mike

 

[STX Bronco]

Sorry for not being more clear. I plan on getting a bestop trektop for my 2d. If you look at their setup/install video there is hardware added to the roll cage for the top to mount to. From the only pic of your top I have seen it looks like there will be some challenges to use both tops. From the pic I saw your top looks to be the cleanest looking sunshade to date, I am looking forward to your finished product.
Here is a pic of why I am asking.

There looks to be a rail/anchor points for the roof to hinge back and there is more bolted rails under the folded top in the rear.

 

[BuckyAsh]

it says to put it on you must remove a latch of the soft top. I ask because your competition doesn’t look as good but you can leave it on when you latch the soft top back down. Just want to make sure.
thank you.

You take off the bracket and then put it right back on. It makes it easier to stretch the Bimini first instead of trying to pull it into the brackets while they are on. When you are done both the Bimini and the brackets will be on. Will take just a minute with your supplied Bronco toolset.

 

[STX Bronco]

@JTopsUSA bump…

Sponsored