JcrOffroad - prototyping begins!

[GreenMtnBronco]

There is nowhere to hide the winch. You have a lot of under bits in the way. Keep both ACC and unblocked factory located front camera is a loosing battle.

BAMF is coming out with a sensor relocation bracket for their bumper and did a good job of unblocking the camera with a solenoid relocation kit as well... love to see more options to their winch..

Sponsored

 

[Ramble_Offroad]

Fantastic. Thanks for your willingness to share development direction publicly.

Please continue with efforts to relocate the rear camera. Special request that revised location would not be on the spare. It would be rad to maintain rear camera function when running a wheel mounted trash bag. I did this on my old Tacoma with a high clearance dual swing rear bumper and it worked very well.

cheers & good luck!
- Nels

 

[da_jokker]

The ACC Only comes on a lux package. So if your front bumper can mount a winch, account for all the other sensors (forward sensing, 2.7 heat exchanger, and block as little of the camera as you can (especially if people relocate the winch solenoid) you will probably have a big time winner because it will cover most Bronco Builds.

 

[jonesh242]

Please make some skid plates for the trailing arm mounts. They’re super exposed, and tend to drag/scrape on obstacles. And nobody has made anything to address that yet.

Yes...what he said! Skid plates for the trailing are mounts.

 

[Vantcrst]

Yes...what he said! Skid plates for the trailing are mounts.

Agree with above and there are not many FRAME mounted rock rails out there either if you are looking for ideas. Also wouldn’t mind seeing some of these front bumpers with 2 inch hitch receiver option. A receiver mounted winch would take care of the issue with blocking camera an acc sensors be use you would only install it when you use it. Plus gives the flexibility of moving it from front to rear 2” receiver.

 

[wanna1]

Agree with above and there are not many FRAME mounted rock rails out there either if you are looking for ideas. Also wouldn’t mind seeing some of these front bumpers with 2 inch hitch receiver option. A receiver mounted winch would take care of the issue with blocking camera an acc sensors be use you would only install it when you use it. Plus gives the flexibility of moving it from front to rear 2” receiver.

This!!!

 

[JcrOffroad]

Here’s the rendering of the winch plate. Next up is to turn it into a prototype!

 

[evgenyvasenev]

Here’s the rendering of the winch plate. Next up is to turn it into a prototype!

Does it work only for a modular bumper? Would it support the camera relocation kit?

 

[67BroncoG1]

Here’s the rendering of the winch plate. Next up is to turn it into a prototype!

I love the simplicity of this. I don't really want a huge bumper but rather something simple that will mount a winch high enough not to drastically limit approach angle.

 

[JcrOffroad]

Does it work only for a modular bumper? Would it support the camera relocation kit?

Yes. Mod bumper only. Camera relocation is TBD.

 

[Raskew]

Yes. Mod bumper only. Camera relocation is TBD.

If you can make that work with camera relocation, you will sell a million of them

 

[LowerSlowerDelaware]

How about a Bumper for those of us that know we don't need or want a winch? No need or desire for holes for the sensors or cameras.

Nice Low Profile or Pre-Runner supporting a good looking hoop to protect our grills and hoods from the damn deer

The Bronco equivalent of an Aussie 'Roo Bar. More stylish than a Ranch Hand grill guard.​

 

[JcrOffroad]

Renderings from marketing of the bumpers! They are cutting on the laser this week!

 

[Bird Dog Off Road]

Renderings from marketing of the bumpers! They are cutting on the laser this week!

Looks great!

 

[Gotdesl]

Are these bumpers set up to match the Sasquatch or standard width fender flares?

Sponsored