That KC Pro 6 bar only draws 13amps plus you'd likely run it through a relay anyway and use the Ford aux wire just as a trigger to the relay.Did you use the standard AUX wire? Are you worried about it drawing to much current for the ford supplied wire? I wish Ford had used a slightly larger gauge wire. Also, that they ran 2 wires instead of just one. If I place any lights that high I would more than likley choose something with a running light, requiring the 2nd wire.
Same! I was thinking “I gotta see this”dammit - misleading title - I was expecting 50" tires!
so they are 34" tires? how do they ride on the pavement?I haven’t really posted on here since I got my 2 door back in December. But figured I’d update!
here is when I first picked it up
i enjoyed it stock (briefly) then decided to go with Toyo AT3s, black rhino Axle wheels and a 1 inch RC level
ended up adding Sasquatch fender flares and went with a KC Pro6 50 light set up
Big thanks to the guys at Main Line Overland in West Chester, PA.
There’s some other little stuff here and there but after the GMRS radio I think it’s all done (for now).
Really happy with the Bronco and glad it turned out how I envisioned it!
That’s what I’m planning. My ration is dash mounted in my Jeep. Short dash makes it challenging there. the Bronco has more depth. Better roomPicatinny rail up on the dash
Your bronco is Looking real nice man. What's your opinion on the light output of the pro6?I haven’t really posted on here since I got my 2 door back in December. But figured I’d update!
here is when I first picked it up
i enjoyed it stock (briefly) then decided to go with Toyo AT3s, black rhino Axle wheels and a 1 inch RC level
ended up adding Sasquatch fender flares and went with a KC Pro6 50 light set up
Big thanks to the guys at Main Line Overland in West Chester, PA.
There’s some other little stuff here and there but after the GMRS radio I think it’s all done (for now).
Really happy with the Bronco and glad it turned out how I envisioned it!
I did have them install those before taking delivery. They've been great so far!Looks amazing! Did you have your dealer install those pod lights, or how was that process?
So far they've been great! I haven't had them out on the trail at night yet but will soon. They throw a lot of light and you can angle them more if you want. So far I haven't messed with the set up, I have the ditch lights facing out more to the side. The BAMF brackets are solid and I would recommend using them. I do get some light glare off the hood but that's to be expected. Overall I think you'll love it!Your bronco is Looking real nice man. What's your opinion on the light output of the pro6?
I got the flex er4 mounted as ditch/front light and they are bright as hell, I love them and I'm going to place order for the pro6 50 light bar and it be nice to get your opinion on them.
I certainly get wind noise but it isn't much worse than normal. I fear my roof is a bit noisier than most. I get a lot of squeaking out of the back and for my low speed travel I get more of that than wind noise. With higher speed, I can tell its up there. I only really experience it when driving multiple hours to the beach or mountains (80+mph allegedly). Once I work out the other roof noises, I'm sure I will notice it more. But I have to say it is less than I expected. No whistling or anything like that.I put the 50in led bar on and the wind noise was terrible had to remove it how is it on your setup?