LED Cargo Area Lighting Module from ORACLE Lighting

[ORACLE Lighting]

Maybe you have already noticed the the factory LED interior lights do little to provide illumination for the rear cargo area on the new Ford Bronco. This makes it difficult to see at night when accessing cargo. We have been working to develop an integrated Cargo LED Light Module easily adds bright LED light to the rear hatch cargo space as well as the area around the vehicle using the vehicles existing 12V power source. This integrated light module simply replaces the factory wiper motor cover with the new cover using the included parts and plug the adapter into your rear accessory socket. The lights can easily be turned on and off with the flush switch located on the panel.

More info coming soon!

Sponsored

 

[CKXVII]

I’m sure I’ll buy one of these once I’ve purchased the MIC top in 2023….

Any chance ya’ll are working on cargo lighting options for the soft-top?

 

[PatientlyWaiting]

Sold!

 

[Captain nSANEo]

NICE!!!!, I'll wait til you make one for the Modular roof in 23' or 24'...or 25' cause I'm not buying a Webasto MIC with all its issues

 

[phocion]

Looks good, and fills a need. Nice to see companies stepping up to the plate to fill in some of the areas where the stock Bronco is less than great.

 

[Headsong]

When I first saw a Bronco when they were previewing them I noted right away that lousy little light with no output back there and immediately put on my list a better light hooked to an Aux switch. I've got a soft top if I ever do have it, so figuring it'll have to be something up on the rollbar, maybe. I guess it could be battery operated, too....Even the Sport has great lights back there, that swivel!!

 

[kbBronco]

Just got my light up letters in the mail, and excited to add this to my rig too!

 

[slocobra03]

I’m sold

 

[pharden]

build a light that works for soft tops!

 

[helifino16]

Following...

I gots to have this!

 

[etmccaus86]

build a light that works for soft tops!

This. Good way to ensure your volumes are high...

 

[hollapm]

IT should be easy to hard wire into the housing for the wiper motor - need to see if there is a constant hot or a wire run in this area which can tie into a switch - and have tied into a switch for when the back window (or tailgate opens) this way it turns on when the back is opened.
I see on the housing there is a button to turn on/off. How does this button work? When the light is plugged in - does it default to off/on or does it maintain state of the last button push (a hard button?)

Also how much larger is the housing than just the motor housing and can the light be adjusted to shine more into the vehicle? It appears to shine underneath versus into the vehicle from the videos.

 

[ORACLE Lighting]

IT should be easy to hard wire into the housing for the wiper motor - need to see if there is a constant hot or a wire run in this area which can tie into a switch - and have tied into a switch for when the back window (or tailgate opens) this way it turns on when the back is opened.
I see on the housing there is a button to turn on/off. How does this button work? When the light is plugged in - does it default to off/on or does it maintain state of the last button push (a hard button?)

Also how much larger is the housing than just the motor housing and can the light be adjusted to shine more into the vehicle? It appears to shine underneath versus into the vehicle from the videos.

There is not a constant on the motor connector but you can hardwire the cigarette adapter if you are just looking to keep that socket open. The button on the box defaults to the off position when power is removed. The angle in the video with the prototype part is not an exact representation of the final version of the light angle as you noticed.

 

[Tarheel_Wes]

There is not a constant on the motor connector but you can hardwire the cigarette adapter if you are just looking to keep that socket open. The button on the box defaults to the off position when power is removed. The angle in the video with the prototype part is not an exact representation of the final version of the light angle as you noticed.

Following this.

So, could it be wired to come on when one opened the rear hatch (or a door), but also have a manual on/off for like if you are camping inside ?

 

[buzpro]

Maybe you have already noticed the the factory LED interior lights do little to provide illumination for the rear cargo area on the new Ford Bronco. This makes it difficult to see at night when accessing cargo. We have been working to develop an integrated Cargo LED Light Module easily adds bright LED light to the rear hatch cargo space as well as the area around the vehicle using the vehicles existing 12V power source. This integrated light module simply replaces the factory wiper motor cover with the new cover using the included parts and plug the adapter into your rear accessory socket. The lights can easily be turned on and off with the flush switch located on the panel.

More info coming soon!

Very cool .... how about some lighting solutions for the 1. Glove Box, 2. The Armrest storage area and the 3. Center Console in front of the shifter?

Ford has missed all these obvious spots for a plus $50K vehicle ..... instead, they gave us ambient lighting for our feet!

Sponsored