Let's see the stablemates!!!

[GoHawks63]

We love the LC. We have had a 60 series and 2 FZJ80s, with the most recent 96 (Lexus LX450) with 2.5" lift and 35s that we sold before this arrived. We waited for about 6 months which was a lot shorter than the Bronco in 2021.

The hybrid is totally fine and fairly seamless. Feels like it has plenty of power and oh the highway driving in UT at 90 MPH we get around 23 MPG. The bronco with 37s now gets about 14.5.

Good to know and glad you're enjoying it.

Sponsored

 

[Tye]

Did you hear my jaw hit the floor?
Epic build! Love it. Details please......

I tell everyone, my 911 is the polar opposite of my Bronco. You're at that end of the spectrum too with a BRaptor and a 997 GT3.

Thank you, here are the details on my build, which I did the majority of the work installing everything.

Exterior:
2012 PMNA GT3 Cup car bumpers
2012 PMNA GT3 Cup car fenders and flares and wheel liners
2012 PMNA GT3 Cup front "flap"
2012 PMNA GT3 Cup deck lid
2010 OEM RS rear wing
2012 PMNA GT3 Cup Wing Uprights
2012 PMNA GT3 Cup Wing Endplates
2012 PMNA GT3 Cup Mirrors
OEM LED tail lights
PMNA Cup tow hooks
PMNA GTC Bumper Brake Ducts
PMNA GT3 Cup Fender liners
Capital City Air Exit Screens (in front of front tire)
Orbit Racing Carbon Fiber Dive Planes
Orbit Racing Carbon Fiber Gurney Flap
BBS motorsport forged monoblocks (1 of 6 sets made, i worked with bbs motorsports to make these to emulate the cup mono block wheel)

Interior:

Carbon Fiber:
Dash strip and trims
Instrument Cluster Surround
Steering Column
Piece above steering column and under instrument cluster
front consule
center consule
rear consule
gt3 name plate on rear carpet
Shift knob front
Shift knob cap with gear pattern in yellow
outer full length door sills
fuse box cover
seat belt opening
rectangle piece on front door panel
steering wheel center trim with airbag logo in yellow
light switch surround
ignition surround
e-brake button
e-brake back trim
Inner door sills
Long door trim
Door speaker covers
Door lower panel (replaced the carpeted lower section of the door card)

Leather with Yellow stitching:
OEM Dash
Sport chrono cover
Dome light surround
Dash end caps
Door triangles
Side PCM trim panels
Defroster vents
Center speaker cover
Dash speaker covers
Rear speaker covers
Upper front door panel
Seat Belt Height adjuster cover
Door spears
Door handle

Alcantara with Yellow Stitching:
Shift boot
OEM Center console lid with Porsche Logo
OEM 2010 GT3 RS steering wheel (made thicker) with yellow stripe at 12 o clock
E-brake handle with carbon insert and GT3 script
E-brake Base
Long Door Pulls
Door pocket covers

Other:
Yellow front Seat Belts
Alcantara Lower Dash
GT2 Carbon Bucket Seats
Satin Black Painted PCM stack
Rear interior panels in leather and alcantara with yellow stitching
2010+ round airbag and steering control module
OEM Clubsport Roll Bar

Performance:
Sharwerks/EvoMS Tune
Sharkwerks/EVoMS headers and 200 cell cats
Sharkwerks Bypass
Autosea carbon fiber airbox with dual cone setup
KW Motorsport 3 ways
Porsche Motorsport Dog Bones
Porsche Motorsport RSR Style Compression Forks
Porsche Motorsport Toe/bump Steer Kit ( Front and Rear )
Porsche Motorsport Forged 2-piece Control Arms ( Front and Rear )
OEM GT2 rear sway bar
Powergrid Drop Links ( Front and Rear )

 

[Bronc69]

Thank you, here are the details on my build, which I did the majority of the work installing everything.

Exterior:
2012 PMNA GT3 Cup car bumpers
2012 PMNA GT3 Cup car fenders and flares and wheel liners
2012 PMNA GT3 Cup front "flap"
2012 PMNA GT3 Cup deck lid
2010 OEM RS rear wing
2012 PMNA GT3 Cup Wing Uprights
2012 PMNA GT3 Cup Wing Endplates
2012 PMNA GT3 Cup Mirrors
OEM LED tail lights
PMNA Cup tow hooks
PMNA GTC Bumper Brake Ducts
PMNA GT3 Cup Fender liners
Capital City Air Exit Screens (in front of front tire)
Orbit Racing Carbon Fiber Dive Planes
Orbit Racing Carbon Fiber Gurney Flap
BBS motorsport forged monoblocks (1 of 6 sets made, i worked with bbs motorsports to make these to emulate the cup mono block wheel)

Interior:

Carbon Fiber:
Dash strip and trims
Instrument Cluster Surround
Steering Column
Piece above steering column and under instrument cluster
front consule
center consule
rear consule
gt3 name plate on rear carpet
Shift knob front
Shift knob cap with gear pattern in yellow
outer full length door sills
fuse box cover
seat belt opening
rectangle piece on front door panel
steering wheel center trim with airbag logo in yellow
light switch surround
ignition surround
e-brake button
e-brake back trim
Inner door sills
Long door trim
Door speaker covers
Door lower panel (replaced the carpeted lower section of the door card)

Leather with Yellow stitching:
OEM Dash
Sport chrono cover
Dome light surround
Dash end caps
Door triangles
Side PCM trim panels
Defroster vents
Center speaker cover
Dash speaker covers
Rear speaker covers
Upper front door panel
Seat Belt Height adjuster cover
Door spears
Door handle

Alcantara with Yellow Stitching:
Shift boot
OEM Center console lid with Porsche Logo
OEM 2010 GT3 RS steering wheel (made thicker) with yellow stripe at 12 o clock
E-brake handle with carbon insert and GT3 script
E-brake Base
Long Door Pulls
Door pocket covers

Other:
Yellow front Seat Belts
Alcantara Lower Dash
GT2 Carbon Bucket Seats
Satin Black Painted PCM stack
Rear interior panels in leather and alcantara with yellow stitching
2010+ round airbag and steering control module
OEM Clubsport Roll Bar

Performance:
Sharwerks/EvoMS Tune
Sharkwerks/EVoMS headers and 200 cell cats
Sharkwerks Bypass
Autosea carbon fiber airbox with dual cone setup
KW Motorsport 3 ways
Porsche Motorsport Dog Bones
Porsche Motorsport RSR Style Compression Forks
Porsche Motorsport Toe/bump Steer Kit ( Front and Rear )
Porsche Motorsport Forged 2-piece Control Arms ( Front and Rear )
OEM GT2 rear sway bar
Powergrid Drop Links ( Front and Rear )

The things dreams are made of!
EPIC build. Love it! Hope you enjoy it often.

 

[gunt520]

1990 Ford Ranger

 

[dpAtlanta]

Thank you, here are the details on my build, which I did the majority of the work installing everything.

Exterior:
2012 PMNA GT3 Cup car bumpers
2012 PMNA GT3 Cup car fenders and flares and wheel liners
2012 PMNA GT3 Cup front "flap"
2012 PMNA GT3 Cup deck lid
2010 OEM RS rear wing
2012 PMNA GT3 Cup Wing Uprights
2012 PMNA GT3 Cup Wing Endplates
2012 PMNA GT3 Cup Mirrors
OEM LED tail lights
PMNA Cup tow hooks
PMNA GTC Bumper Brake Ducts
PMNA GT3 Cup Fender liners
Capital City Air Exit Screens (in front of front tire)
Orbit Racing Carbon Fiber Dive Planes
Orbit Racing Carbon Fiber Gurney Flap
BBS motorsport forged monoblocks (1 of 6 sets made, i worked with bbs motorsports to make these to emulate the cup mono block wheel)

Interior:

Carbon Fiber:
Dash strip and trims
Instrument Cluster Surround
Steering Column
Piece above steering column and under instrument cluster
front consule
center consule
rear consule
gt3 name plate on rear carpet
Shift knob front
Shift knob cap with gear pattern in yellow
outer full length door sills
fuse box cover
seat belt opening
rectangle piece on front door panel
steering wheel center trim with airbag logo in yellow
light switch surround
ignition surround
e-brake button
e-brake back trim
Inner door sills
Long door trim
Door speaker covers
Door lower panel (replaced the carpeted lower section of the door card)

Leather with Yellow stitching:
OEM Dash
Sport chrono cover
Dome light surround
Dash end caps
Door triangles
Side PCM trim panels
Defroster vents
Center speaker cover
Dash speaker covers
Rear speaker covers
Upper front door panel
Seat Belt Height adjuster cover
Door spears
Door handle

Alcantara with Yellow Stitching:
Shift boot
OEM Center console lid with Porsche Logo
OEM 2010 GT3 RS steering wheel (made thicker) with yellow stripe at 12 o clock
E-brake handle with carbon insert and GT3 script
E-brake Base
Long Door Pulls
Door pocket covers

Other:
Yellow front Seat Belts
Alcantara Lower Dash
GT2 Carbon Bucket Seats
Satin Black Painted PCM stack
Rear interior panels in leather and alcantara with yellow stitching
2010+ round airbag and steering control module
OEM Clubsport Roll Bar

Performance:
Sharwerks/EvoMS Tune
Sharkwerks/EVoMS headers and 200 cell cats
Sharkwerks Bypass
Autosea carbon fiber airbox with dual cone setup
KW Motorsport 3 ways
Porsche Motorsport Dog Bones
Porsche Motorsport RSR Style Compression Forks
Porsche Motorsport Toe/bump Steer Kit ( Front and Rear )
Porsche Motorsport Forged 2-piece Control Arms ( Front and Rear )
OEM GT2 rear sway bar
Powergrid Drop Links ( Front and Rear )

So, basically still in stock configuration huh?

Nice…!!!!!

 

[JustWideman]

The "Poverty Spec" 2-car haul.
'21 Sonata Limited (Camel an Coal) leather, full glass roof low riding city car
'24 Big Bend 4D (Mid-spec MGV) for trips and state/national park adventures

 

[buckybronc23]

2024 Big Bend Sasquatch
2024 Heritage Edition
2024 Xpress 20ft Shallow Water Bay

 

[The Beaz]

Silver Beauty

The Little Pony

And the Little Big Sister

 

[Sherminiator]

Seeing some of the cars in this thread just reinforces why we had ADMs when they first came out

 

[Bee Bop]

Here is my stable from oldest to newest. Get ready for a photo dump.

1991 Chevy S10
it is the only bowtie I will drive. It was my grandfathers truck 116,000 miles on it.

2002 Mustang GT Convertible
My first vert and first GT. it is my baby. 154,000 miles on it.

My 2021 Bronco Badlands. Pretty much my daily driver.

My 2024 Mustang Dark Horse. My newest toy.

 

[CCMDoc]

Almost ready to hit the road

 

[One more upgrade]

Brothers

 

[DewarT]

1970

2025

1975

 

[Ducati1098]

2006 C6Z

 

[RLW]

1986 Mercedes Benz 560SL
1977 Jeep Wagoneer
The Bronco, of course.
Not pictured:
2001 Lexus GS 300, my daily driver
2022 Honda minivan. We got 3 little kids. This is the best vehicle I own.

Sponsored