Look what I put together: Custom Snorkel Cover

[CitrusBronco]

I put together this snorkel cover plate a while back, cut this from aluminum and mixed up some Cerakote. Today I Laser engraved this graphic on.
It’s the little things.
Everglades snorkel cover custom edition.

Sponsored

 

[KRAKEN]

Very cool.......... nice job.

 

[Squatch]

Jokes aside, it looks really well done.

 

[Jonny way]

https://www.ebay.com/itm/3956822770...EflJ4R9dvLL5nsPFr4=|tkp:Bk9SR_643su_ZA&edge=1

 

[CitrusBronco]

Jokes aside, it looks really well done.

Thanks. If I’m going to have this thing hanging off my fender I might as well have some fun with it.

 

[CitrusBronco]

https://www.ebay.com/itm/395682277054?_skw=bronco+snorkle&itmmeta=01J7YBQKHR7JZVDVKGZ2Z30Q86&hash=item5c208066be:g:j1gAAOSwRuxlhjPB&itmprp=enc:AQAJAAAA0HoV3kP08IDx+KZ9MfhVJKn+l43dl79WoQluizfzQYPY275fIAivd2SysvfP9V0c3zONiwL3AkC1sdj+Fs/VdSywTIDJYkxm68DNEY7TFu2lzjR6Dtn5klAdq+EOiFSf2ZiT9U13xdoRbCjLb4QM4LIjbcPilf1Py9po1Z7sw6ZXmoSPykl0JbgsL7TsK4lOJ0VQQkw1B5h8xlV0vW+AOf39MD3HlpNDHBcEehMXTE1fPj/DwvOYeE4kBSb3EmEFuvhpPEflJ4R9dvLL5nsPFr4=|tkp:Bk9SR_643su_ZA&edge=1

If you want to dress it up let me know. I can put any design you want on it.

 

[Valhalla]

36.4 inches

Everglades models add mud-terrain tires mounted on 17-inch wheels and a factory snorkel mounted to the A-pillar. The front and rear axles, transfer case, and transmission cooling vents are also raised to allow for a maximum of 36.4 inches of water fording depth, 2.9 inches higher than the regular Bronco Sasquatch.Feb 10, 2022


Sorry, I still don't get the snorkel on these.

 

[CitrusBronco]

36.4 inches

Everglades models add mud-terrain tires mounted on 17-inch wheels and a factory snorkel mounted to the A-pillar. The front and rear axles, transfer case, and transmission cooling vents are also raised to allow for a maximum of 36.4 inches of water fording depth, 2.9 inches higher than the regular Bronco Sasquatch.Feb 10, 2022


Sorry, I still don't get the snorkel on these.

As much as I do think the snorkel is silly since I can’t dunk the entire truck underwater due to all its electronics it is functional on the Bronco.
What’s not to get. It takes the air intake from the front passenger grill area and moved it up.
it actually changes the fresh air intake source and closes off the hole in the front of air box that other broncos ingest air, dust and water through.
Plus it gives a spot to add silly Easter eggs of your own like this.

 

[Valhalla]

...more the functional aspect especially on a turbo vehicle with a alternator so low.

 

[CitrusBronco]

...more the functional aspect especially on a turbo vehicle with a alternator so low.

I get where your coming from that a Bronco is not going underwater and staying running however the snorkel does add fording depth to these trucks.
In general a turbo and alternator are no issue with true underwater fording, both can run underwater as long as the intake is sealed. Our military trucks had turbos and alternators that went under water with no issues.
It seems to be the mud/sand that gets in and destroy the alternator. At least that is the way it used to be.
Anyway just some general info sharing.

Sponsored