Mabett Front Winch Bumpers

[Vicman12]

Camera has some protection now.

Love this camera protection ! Please tell me where to get the items to do this???

Sponsored

 

[GrumpyVet]

I used a 3/8”x3.5”x4.63” u-bolt I found over at Ace hardware. The OE camera mount holes are 3/8” but I did need to drill the Mabett mount and back cover holes to 3/8”. Then I used washers on the front and back along with nylon nuts. So I total of 4 washers 4 nuts that I had laying around. I wanted to add shrink tube to the u-bolt but couldn’t find my stash so I went with some wire loom sleeving just to black it out.

 

[Vicman12]

Hi Mabett! I tried to purchase this winch plate but it shows no longer available when will you have more of these in stock ?

 

[Mabett]

Hi Mabett! I tried to purchase this winch plate but it shows no longer available when will you have more of these in stock ?

It will be in the following month.

 

[Vicman12]

It will be in the following month.

Sweet! Sounds good thank you

 

[Jebster]

Any other people out there pick this up? If so what are your experiences? This looks like it checks most of the boxes I had for a winch mount.

 

[Canvasback]

Any update when you will have these back in stock?

 

[Mabett]

Any update when you will have these back in stock?

Expected to arrive on the 16th of this month.

 

[Canvasback]

Expected to arrive on the 16th of this month.

Great thank you. Is there a customer line to contact regarding the roll up cargo cover? I need to replace a lost cleat that holds it open.

 

[Mabett]

Great thank you. Is there a customer line to contact regarding the roll up cargo cover? I need to replace a lost cleat that holds it open.

You can click my avatar and start a conversation. I will help you.

Sponsored