Mabett Mud Flaps Fits Sasquatch set that accommodates factory rock rails or tube steps

[Lifeliberty]

I cannot for the life of me get the expansion screws to “stick” in place and hold the flap to the liner. Right now it hangs out over the crash bar

Either swap it with another screw, or go to auto store(napa etc) tomorrow and get some other ones

Sponsored

 

[Mabett]

When you say there is a gap due to the crash bar, does it affect the performance/functionality of the front flap? I have Wildtrak Sas, and just ordered these. Wondering if I should hold off for a version without the crash bar? The gap appears to be on the 'inside' of the tire/wheel, so wasn't sure if this is a non-issue in terms of rocks, etc?

I wonder if all SAS have the crash bar removed

 

[Mabett]

I wonder if all SAS have the crash bar removed

 

[Mabett]

I cannot for the life of me get the expansion screws to “stick” in place and hold the flap to the liner. Right now it hangs out over the crash bar

When rotating the expansion nut, please do not let your screwdriver push forward, it must only rotate laterally, and use your fingers to press the shell of the expansion nut, do not let the shell rotate with the expansion nut, this is what I found when I installed it myself

 

[Wildfire1]

I wonder if all SAS have the crash bar removed

Yes. All Sas has the crash bars removed.

 

[Mabett]

Yes. All Sas has the crash bars removed.

thank you!

 

[Mabett]

Judging from the current feedback, this person's evaluation is ridiculous, I have to suspect that my competitors did it, if you buy the mud flaps of MABETT and install it normally, hope you can upload pictures, videos and comments to Amazon, I would be very grateful

I also hope that you will report these malicious comments, just click "Report abuse" under the comments

https://www.amazon.com/Mabett-Splash-Accessories-Punching-Required/dp/B0B429KFYQ/ref=sr_1_1?crid=1SWNLXJ575ZAH&keywords=bronco+mud+flaps&qid=1656840455&sprefix=bronco+mud+fls,aps,965&sr=8-1

If the person who posted this review can see the information I posted, please contact me, I will face up to any problems with my product

 

[Wildfire1]

If the person who posted this review can see the information I posted, please contact me, I will face up to any problems with my product

I’m waiting on your mud flaps for my factory SAS With factory steps. I like all your products. Hoping the flaps will fit. Will post my findings.

 

[I3RONCO]

Are these available without the mountain design? And can anyone provide a link to those? Thanks.

 

[iamcris]

Received my mud flaps sooner than expected. Excellent packaging, excellent color photo instructions. There's even a how to install video on Amazon from the seller. Once I figured out one side the other side (both front and back) took about 5-10 minutes. These look great, they are a solid construction. They FIT ON MY SASQUATCH WITH FACTORY ROCK SLIDES. I'll attach photos. I will DEFINITELY be buying more Mabett products. I am thrilled these only cost $119. They also come off easily if you want to hop on a trail. Well done Mabett and thank you for providing my Bronco protection from rock chips on my paint. Absolutely worth it.

 

[66GT]

I’m waiting on your mud flaps for my factory SAS With factory steps. I like all your products. Hoping the flaps will fit. Will post my findings.

Looks like you have a prototype 2023 Mabett Edition Bronco. Sweet!

 

[Mabett]

Received my mud flaps sooner than expected. Excellent packaging, excellent color photo instructions. There's even a how to install video on Amazon from the seller. Once I figured out one side the other side (both front and back) took about 5-10 minutes. These look great, they are a solid construction. They FIT ON MY SASQUATCH WITH FACTORY ROCK SLIDES. I'll attach photos. I will DEFINITELY be buying more Mabett products. I am thrilled these only cost $119. They also come off easily if you want to hop on a trail. Well done Mabett and thank you for providing my Bronco protection from rock chips on my paint. Absolutely worth it.

Thank you for your feedback, I would appreciate it if you could leave a review for my product on Amazon, it means a lot to me, of course it's not required, just hope you have a good shopping experience

 

[Wildfire1]

Looks like you have a prototype 2023 Mabett Edition Bronco. Sweet!

The Bronco just showed up last Friday and like most of us we had parts and accessories stock piled lol. Been working at it pretty well all weekend and far from done. I like Mabett’s stuff. Fits and works well. Todays it will be time to get the shock module for the beast installed.

Happy Fourth.

 

[Patriotic]

Judging from the current feedback, this person's evaluation is ridiculous, I have to suspect that my competitors did it, if you buy the mud flaps of MABETT and install it normally, hope you can upload pictures, videos and comments to Amazon, I would be very grateful

I also hope that you will report these malicious comments, just click "Report abuse" under the comments

https://www.amazon.com/Mabett-Splash-Accessories-Punching-Required/dp/B0B429KFYQ/ref=sr_1_1?crid=1SWNLXJ575ZAH&keywords=bronco+mud+flaps&qid=1656840455&sprefix=bronco+mud+fls,aps,965&sr=8-1

You lost me at Report Abuse. Smacks of cancel culture which is no-no In the USA.

 

[I3RONCO]

Are these available without the mountain design? And can anyone provide a link to those? Thanks.

The thumbs up is a good sign, a link would be better . I’ve tried to find it but am too dumb to locate apparently.

Sponsored