Mag-Hytec deep aluminum 10R transmission pan

[Kevin Scarbel]

I contacted Mag-Hytec yesterday and encouraged them to introduce a pan for the 10R60. Their aluminum pans dissipate heat, have a drain plug and magnet, and add oil capacity.
I joined a construction company years ago as maintenance manager whose vast fleet of Super-Duties were going through trannies right and left. I added Mag-Hytec pans, Amsoil fluid and started using Jasper remans. What had been a huge issue for the company disappeared.

Sponsored

 

[CarbonSteel]

Already at least two on the market:

PPE - https://ppepower.com/collections/tr...onco-10r80-60-2017-raw?variant=43739368194291

Mishimoto - https://www.mishimoto.com/aluminum-transmission-pan-ford-10r60-10r80-transmissions.html

I did a comparison of both here:

https://www.bronco6g.com/forum/threads/ppe-mishimoto-transmission-pan-comparison.86774/

 

[Kevin Scarbel]

Already at least two on the market:

PPE - https://ppepower.com/collections/tr...onco-10r80-60-2017-raw?variant=43739368194291

Mishimoto - https://www.mishimoto.com/aluminum-transmission-pan-ford-10r60-10r80-transmissions.html

I did a comparison of both here:

https://www.bronco6g.com/forum/threads/ppe-mishimoto-transmission-pan-comparison.86774/

Thank you so much. I didn't know.
As my Bronco won't arrive until April, may I ask how much clearance (skid plate?) there is for a deeper, larger capacity pan on the 10R60 ?

 

[CarbonSteel]

Thank you so much. I didn't know.
As my Bronco won't arrive until April, may I ask how much clearance (skid plate?) there is for a deeper, larger capacity pan on the 10R60 ?

Here is a post that shows the Mishimoto pan depth and the clearance that I have from the OEM pan to the skid plate. I think that either PPE or Mishimoto will have plenty of clearance:

https://www.bronco6g.com/forum/threads/mishimoto-transmission-pan-on-sale.84855/post-2109675

Sponsored