Sponsored

Ksjrb03

First Edition
Well-Known Member
Joined
Jul 15, 2020
Threads
14
Messages
4,206
Reaction score
11,103
Location
Tx
Vehicle(s)
F250
Your Bronco Model
First Edition
Clubs
 
I had one of those arms mounted to the dash accessory point for about one trip to work. Hated it up there, I don’t need my phone right in my face at all times, and it just looked goofy. Went on the hunt for a more realistic mounting point for my needs, and finally come up with a finished product I love. All parts listed at end of post. Shop manual for removing console also attached.

Started with this clamp mount from Vortex signs. Clamps perfect to the console grab handle and matches my FE black/gray.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ 95ACD5AA-E062-4DEF-8FDD-AA387F5CDE91



They have two phone mount options for this one. I went with the MagSafe, have to supply your own apple charger.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ CACE01D8-B1F5-4EE4-A06D-894D00BBAA11


It worked great. If you like the looks of this you can stop here. But I didn’t like the big white charger and the way the cable was laying around. And as you can see in pic, the Bronco gave an error message every startup. On the hunt I went for a better magsafe charger solution and wire concealment.

I came up with this charger from Spiegel. Looks better, and the wire connects in the back, making it easier to hide away.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ 19E4344B-76BD-4AAB-91E1-A2F6EBF61B9A



The spiegel uses a proprietary ball so I had to improvise, and connect a 17mm ball socket to it so it would connect to the Vortex ball mount. Off to the wife’s craft room and a quick mix of 2 part epoxy and I was in business.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E8CD7138-57EC-472F-9416-D39B7B0D2E03


Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ 76465CDE-67BF-4050-8728-89FD23E2D101


To power the charger, and hide the wire away, I installed a USB power source under the center console.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ 919C6751-EE37-421D-A8CE-1AFB05ACD51C


Powered the power source from the 12v socket in the console box using a plug and play adapter.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ FA40566A-5135-40EE-B4D5-05B8E4E07FD5


Power source mounted inside console. Used 3M tape and mounted through a screw on the grab handle mounting plate. It’s not going anywhere.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ 50A46F83-983A-4E3C-ABE2-22934BC0EE29


Plug and Play adapter powering power source. The rear part of center console pulls right off to expose the connector. Easy brezzy.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ 87E79EBF-FCD2-44B9-BA7B-82462CAD805F


Ran the wiring neatly down the grab handle and into the console.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ C2956EB0-D340-4567-A746-334FF73AB228


Finished product. Works great. Doesn't budge.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E861C5CE-A81D-44AF-BCCF-08AC7FEB2A7D

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ 022444FA-5757-4FC3-9900-274B37B5B8B2


Doesn't interfere with precious cup holder space.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ 3C0F359A-4F40-442E-ACC4-8FCC9C13C062


Products I used:

Spiegel charger
https://getspiegel.com/products/wireless-car-charger?variant=33424093806678

Vortex Mount
https://www.vortexsigns.com/phone-m...s/vortex-mira-phone-console-mount-ford-bronco

ball socket
https://www.amazon.com/gp/product/B00CMLX1NS/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

power source
https://www.coolgear.com/product/usb-charger-dual-type-usb-usb-c-ports-mountable-chassis

plug and play 12v (only needed if you don’t want to splice factory wires)
https://www.4dtech.com/12v-pnp-power-accessory-harness/

Phone wallpaper background
https://www.bronco6g.com/forum/threads/phone-wallpapers-for-your-bronco-trim.5710/


Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3
Sponsored

 

Attachments

Last edited by a moderator:

Ig_bronco

Black Diamond
Well-Known Member
First Name
Matthew
Joined
Feb 17, 2021
Threads
37
Messages
671
Reaction score
740
Location
Pittsburgh PA
Vehicle(s)
2014 JKU
Your Bronco Model
Black Diamond
Clubs
 
I had one of those arms mounted to the dash accessory point for about one trip to work. Hated it up there, I don’t need my phone right in my face at all times, and it just looked goofy. Went on the hunt for a more realistic mounting point for my needs, and finally come up with a finished product I love. All parts listed at end of post.

Started with this clamp mount from Vortex signs. Clamps perfect to the console grab handle and matches my FE black/gray.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3



They have two phone mount options for this one. I went with the MagSafe, have to supply your own apple charger.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


it worked great, but I didn’t like the big white charger and the way the cable was laying around. And as you can see in pic, the Bronco gave an error message every startup. On the hunt I went for a better magsafe charger solution and wire concealment.

I came up with this charger from Spiegel. Looks better, and the wire connects in the back, making it easier to hide away.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3



The spiegel uses a proprietary ball so I had to improvise, and connect a 17mm ball socket to it so it would connect to the Vortex ball mount. Off to the wife’s craft room and a quick mix of 2 part epoxy and I was in business.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


To power the charger, and hide the wire away, I installed a USB power source under the center console.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Powered the power source from the 12v socket in the console box using a plug and play adapter.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Power source mounted inside console. Used 3M tape and mounted through a screw on the grab handle mounting plate. It’s not going anywhere.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Plug and Play adapter powering power source. Easy brezzy.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Ran the wiring neatly down the grab handle and into the console.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Finished product. Works great. Doesn't budge.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Doesn't interfere with precious cup holder space.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Products I used:

Spiegel charger
https://getspiegel.com/products/wireless-car-charger?variant=33424093806678

Vortex Mount
https://www.vortexsigns.com/phone-m...s/vortex-mira-phone-console-mount-ford-bronco

ball socket
https://www.amazon.com/gp/product/B00CMLX1NS/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

power source
https://www.coolgear.com/product/usb-charger-dual-type-usb-usb-c-ports-mountable-chassis

plug and play 12v (only needed if you don’t want to splice factory wires)
https://www.4dtech.com/12v-pnp-power-accessory-harness/

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3
I got that same mount with magsafe! I was gonna type a recommendation but you did it way better than I did.
 

emkayw

Base
Well-Known Member
First Name
mike
Joined
Feb 19, 2022
Threads
3
Messages
236
Reaction score
451
Location
southern california
Vehicle(s)
ford fusion
Your Bronco Model
Base
Clubs
 
I had one of those arms mounted to the dash accessory point for about one trip to work. Hated it up there, I don’t need my phone right in my face at all times, and it just looked goofy. Went on the hunt for a more realistic mounting point for my needs, and finally come up with a finished product I love. All parts listed at end of post.

Started with this clamp mount from Vortex signs. Clamps perfect to the console grab handle and matches my FE black/gray.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3



They have two phone mount options for this one. I went with the MagSafe, have to supply your own apple charger.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


it worked great, but I didn’t like the big white charger and the way the cable was laying around. And as you can see in pic, the Bronco gave an error message every startup. On the hunt I went for a better magsafe charger solution and wire concealment.

I came up with this charger from Spiegel. Looks better, and the wire connects in the back, making it easier to hide away.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3



The spiegel uses a proprietary ball so I had to improvise, and connect a 17mm ball socket to it so it would connect to the Vortex ball mount. Off to the wife’s craft room and a quick mix of 2 part epoxy and I was in business.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


To power the charger, and hide the wire away, I installed a USB power source under the center console.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Powered the power source from the 12v socket in the console box using a plug and play adapter.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Power source mounted inside console. Used 3M tape and mounted through a screw on the grab handle mounting plate. It’s not going anywhere.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Plug and Play adapter powering power source. Easy brezzy.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Ran the wiring neatly down the grab handle and into the console.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Finished product. Works great. Doesn't budge.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Doesn't interfere with precious cup holder space.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Products I used:

Spiegel charger
https://getspiegel.com/products/wireless-car-charger?variant=33424093806678

Vortex Mount
https://www.vortexsigns.com/phone-m...s/vortex-mira-phone-console-mount-ford-bronco

ball socket
https://www.amazon.com/gp/product/B00CMLX1NS/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

power source
https://www.coolgear.com/product/usb-charger-dual-type-usb-usb-c-ports-mountable-chassis

plug and play 12v (only needed if you don’t want to splice factory wires)
https://www.4dtech.com/12v-pnp-power-accessory-harness/

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3

Thanks for the info, much appreciated!
 

TripleB

Base
Well-Known Member
Joined
Jul 14, 2020
Threads
28
Messages
1,166
Reaction score
1,787
Location
Georgia
Vehicle(s)
2021 Ford Bronco Base Sas 2.7L, 2023 GMC AT4 HDD
Your Bronco Model
Base
Clubs
 
I had one of those arms mounted to the dash accessory point for about one trip to work. Hated it up there, I don’t need my phone right in my face at all times, and it just looked goofy. Went on the hunt for a more realistic mounting point for my needs, and finally come up with a finished product I love. All parts listed at end of post.

Started with this clamp mount from Vortex signs. Clamps perfect to the console grab handle and matches my FE black/gray.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3



They have two phone mount options for this one. I went with the MagSafe, have to supply your own apple charger.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


it worked great, but I didn’t like the big white charger and the way the cable was laying around. And as you can see in pic, the Bronco gave an error message every startup. On the hunt I went for a better magsafe charger solution and wire concealment.

I came up with this charger from Spiegel. Looks better, and the wire connects in the back, making it easier to hide away.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3



The spiegel uses a proprietary ball so I had to improvise, and connect a 17mm ball socket to it so it would connect to the Vortex ball mount. Off to the wife’s craft room and a quick mix of 2 part epoxy and I was in business.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


To power the charger, and hide the wire away, I installed a USB power source under the center console.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Powered the power source from the 12v socket in the console box using a plug and play adapter.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Power source mounted inside console. Used 3M tape and mounted through a screw on the grab handle mounting plate. It’s not going anywhere.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Plug and Play adapter powering power source. Easy brezzy.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Ran the wiring neatly down the grab handle and into the console.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Finished product. Works great. Doesn't budge.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Doesn't interfere with precious cup holder space.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3


Products I used:

Spiegel charger
https://getspiegel.com/products/wireless-car-charger?variant=33424093806678

Vortex Mount
https://www.vortexsigns.com/phone-m...s/vortex-mira-phone-console-mount-ford-bronco

ball socket
https://www.amazon.com/gp/product/B00CMLX1NS/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

power source
https://www.coolgear.com/product/usb-charger-dual-type-usb-usb-c-ports-mountable-chassis

plug and play 12v (only needed if you don’t want to splice factory wires)
https://www.4dtech.com/12v-pnp-power-accessory-harness/

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ E7E9E124-3317-4179-B8A8-CD2150E32CA3
what phone case are you using?
 
OP
OP
Ksjrb03

Ksjrb03

First Edition
Well-Known Member
Joined
Jul 15, 2020
Threads
14
Messages
4,206
Reaction score
11,103
Location
Tx
Vehicle(s)
F250
Your Bronco Model
First Edition
Clubs
 
Last edited:

Sponsored

RogueSqdn

First Edition
Well-Known Member
First Name
Jared
Joined
May 11, 2021
Threads
2
Messages
370
Reaction score
833
Location
Advance, NC
Vehicle(s)
2021 Bronco
Your Bronco Model
First Edition
Clubs
 
Very inventive. I ended up getting a black non-Apple MagSafe charger and taping it under the rubber mat where the factory wireless charger is. All that’s seen is the wire sticking out and going into the plug.

What I want to know is this…. Where’d you get the phone wallpaper?

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ 4DF00A11-AAE2-4E88-931B-D23BEF78E523


Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ AC353B94-5884-491A-8B5B-92B276223E14
 
Last edited:
OP
OP
Ksjrb03

Ksjrb03

First Edition
Well-Known Member
Joined
Jul 15, 2020
Threads
14
Messages
4,206
Reaction score
11,103
Location
Tx
Vehicle(s)
F250
Your Bronco Model
First Edition
Clubs
 
On this site a long long time ago! The post is out there somewhere, someone made a wallpaper for each trim. Good job on your charger too.
 
OP
OP
Ksjrb03

Ksjrb03

First Edition
Well-Known Member
Joined
Jul 15, 2020
Threads
14
Messages
4,206
Reaction score
11,103
Location
Tx
Vehicle(s)
F250
Your Bronco Model
First Edition
Clubs
 

andrusoid

Base
Well-Known Member
First Name
Steven
Joined
Sep 20, 2020
Threads
33
Messages
974
Reaction score
1,117
Location
Bend, Oregon
Vehicle(s)
2017 Outback, '79 2G, '89 3G, '92 5G White!
Your Bronco Model
Base
Clubs
 
I had one of those arms mounted to the dash accessory point for about one trip to work. Hated it up there, I don’t need my phone right in my face at all times, and it just looked goofy. Went on the hunt for a more realistic mounting point for my needs, and finally come up with a finished product I love. All parts listed at end of post. Shop manual for removing console also attached.

Started with this clamp mount from Vortex signs. Clamps perfect to the console grab handle and matches my FE black/gray.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ AC353B94-5884-491A-8B5B-92B276223E14



They have two phone mount options for this one. I went with the MagSafe, have to supply your own apple charger.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ AC353B94-5884-491A-8B5B-92B276223E14


It worked great. If you like the looks of this you can stop here. But I didn’t like the big white charger and the way the cable was laying around. And as you can see in pic, the Bronco gave an error message every startup. On the hunt I went for a better magsafe charger solution and wire concealment.

I came up with this charger from Spiegel. Looks better, and the wire connects in the back, making it easier to hide away.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ AC353B94-5884-491A-8B5B-92B276223E14



The spiegel uses a proprietary ball so I had to improvise, and connect a 17mm ball socket to it so it would connect to the Vortex ball mount. Off to the wife’s craft room and a quick mix of 2 part epoxy and I was in business.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ AC353B94-5884-491A-8B5B-92B276223E14


Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ AC353B94-5884-491A-8B5B-92B276223E14


To power the charger, and hide the wire away, I installed a USB power source under the center console.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ AC353B94-5884-491A-8B5B-92B276223E14


Powered the power source from the 12v socket in the console box using a plug and play adapter.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ AC353B94-5884-491A-8B5B-92B276223E14


Power source mounted inside console. Used 3M tape and mounted through a screw on the grab handle mounting plate. It’s not going anywhere.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ AC353B94-5884-491A-8B5B-92B276223E14


Plug and Play adapter powering power source. The rear part of center console pulls right off to expose the connector. Easy brezzy.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ AC353B94-5884-491A-8B5B-92B276223E14


Ran the wiring neatly down the grab handle and into the console.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ AC353B94-5884-491A-8B5B-92B276223E14


Finished product. Works great. Doesn't budge.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ AC353B94-5884-491A-8B5B-92B276223E14

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ AC353B94-5884-491A-8B5B-92B276223E14


Doesn't interfere with precious cup holder space.

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ AC353B94-5884-491A-8B5B-92B276223E14


Products I used:

Spiegel charger
https://getspiegel.com/products/wireless-car-charger?variant=33424093806678

Vortex Mount
https://www.vortexsigns.com/phone-m...s/vortex-mira-phone-console-mount-ford-bronco

ball socket
https://www.amazon.com/gp/product/B00CMLX1NS/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1

power source
https://www.coolgear.com/product/usb-charger-dual-type-usb-usb-c-ports-mountable-chassis

plug and play 12v (only needed if you don’t want to splice factory wires)
https://www.4dtech.com/12v-pnp-power-accessory-harness/

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ AC353B94-5884-491A-8B5B-92B276223E14
Nice job! We need more write-ups of this quality. I tried using a Belkin AC vent mount and destroyed the vent flaps.
 

RogueSqdn

First Edition
Well-Known Member
First Name
Jared
Joined
May 11, 2021
Threads
2
Messages
370
Reaction score
833
Location
Advance, NC
Vehicle(s)
2021 Bronco
Your Bronco Model
First Edition
Clubs
 

Sponsored

Bronco-ocnorB

Big Bend
Well-Known Member
First Name
Luke
Joined
Oct 23, 2020
Threads
1
Messages
384
Reaction score
838
Location
DFW
Vehicle(s)
Ford Flex
Your Bronco Model
Big Bend
Clubs
 
Ok, random question. After loving this solution, as I do not have my Bronco yet, has anyone used this on a Bronco with a manual transmission? Does it interfere with shifting at all? With the cup holders in a different spot, it looks tighter space wise...
 

RogueSqdn

First Edition
Well-Known Member
First Name
Jared
Joined
May 11, 2021
Threads
2
Messages
370
Reaction score
833
Location
Advance, NC
Vehicle(s)
2021 Bronco
Your Bronco Model
First Edition
Clubs
 
Ok, random question. After loving this solution, as I do not have my Bronco yet, has anyone used this on a Bronco with a manual transmission? Does it interfere with shifting at all? With the cup holders in a different spot, it looks tighter space wise...
I can’t answer your question directly, but if it either interferes or if you don’t want to mess with wiring you can try what I did. I used an Apple leather magsafe case with my iPhone 13 Pro. The magnet isn’t really strong through the mat but it’s strong enough to grab the phone and charge it.

https://www.amazon.com/dp/B08NX9PC72?ref=ppx_pop_mob_ap_share
 

VictoryLights

Badlands
Well-Known Member
Joined
Jul 9, 2020
Threads
31
Messages
1,758
Reaction score
4,160
Location
Pittsburgh
Vehicle(s)
2018 Honda Pilot
Your Bronco Model
Badlands
Clubs
 
Very inventive. I ended up getting a black non-Apple MagSafe charger and taping it under the rubber mat where the factory wireless charger is. All that’s seen is the wire sticking out and going into the plug.

What I want to know is this…. Where’d you get the phone wallpaper?

Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ 89DFF193-3A39-4334-8D63-FBF937BEEFD6


Ford Bronco MagSafe phone charger mounted to console grab handle - Done ✅ 89DFF193-3A39-4334-8D63-FBF937BEEFD6
This is what I did. I believe I was the first person to ever use duct tape on a new bronco.
 

RogueSqdn

First Edition
Well-Known Member
First Name
Jared
Joined
May 11, 2021
Threads
2
Messages
370
Reaction score
833
Location
Advance, NC
Vehicle(s)
2021 Bronco
Your Bronco Model
First Edition
Clubs
 
Well mine is Gorilla tape, so 😝

Did you post about it? Maybe I got the idea from you. I did this in December. 🤷‍♂️
 

VictoryLights

Badlands
Well-Known Member
Joined
Jul 9, 2020
Threads
31
Messages
1,758
Reaction score
4,160
Location
Pittsburgh
Vehicle(s)
2018 Honda Pilot
Your Bronco Model
Badlands
Clubs
 
Well mine is Gorilla tape, so 😝

Did you post about it? Maybe I got the idea from you. I did this in December. 🤷‍♂️
Haha, I’m not taking credit for that. It looks good though
Sponsored

 
 


Top