Maxlider 4” LIFT KIT PREORDER ANNOUNCEMENT!

[evilletruck]

Got excited for a second but waiting for something with the coilovers. 4 inches is a lot to go with just spacers and UCA's unless theres some voodoo included as well to help the cv and pinion angles

Sponsored

 

[Altitude]

I'm interested in knowing what it being used to create the 'lift' and how it affects compression and rebound on the Bilstein struts. Everything that I read thus far states that the Bilstein HOSS struts do not work well with spacer and internal spring pre-load style lifts due to the secondary internal pistons.

 

[Cbiggs]

Love the lift. I need that striping, though.

Just received mine! Smooth transaction, well packaged, all shook out ready for install very soon!

 

[edgeflyer]

So many people misguided by the whole spring perch vs shock mount spacer. You are creating the exact same issue with the LCA and CV's. Doing some lift from shock mount and some lift from spring perch spacer will net you the exact same issues. 4" is way too much lift without an axle drop. At that point you could probably factor in track width and steering issues on an IFS. Bumpsteer anyone?

 

[Lewisj41]

Our MaxliderBros Stage 1 lift kit is now AVAILABLE TO PREORDER!

2 versions of the Stage 1 lift kit will be available:
- Sasquatch
- Non-Sasquatch

Both kits provide about 4” of total lift and allow you to clear 37x12.5” tires even with -12 offset (on 9” wide wheel). Upper control arms with strut spacers use your factory struts…made by our friends at BDS/Zone!

Price is $1,299 which includes shipping inside the continental U.S.

Get on the preorder list by emailing: [email protected]!

Kit should be ready to ship in next 7-10 days!!! SUPPLIES ARE LIMITED FOR THIS FIRST ROUND!

Stage 2 kit with Fox coilovers on all corners will be available in a few months.

NOTE: 37” on Area 51 and 35” on White below.

Love this retro look. Personally I hope to achieve something to this effect with either white or red Katzkin interior with the BFGoodrich tires.

 

[noliveaxle]

this bronco is sick. how do i sign up for a low interest 10 year loan.

 

[Maxlider Brothers Customs]

It is stated there are two kits.
4" lift over stock Sasquatch
4" lift over non-Sasquatch

Actually, it ends up being almost 4” of total lift (on a base) which is like 2.8” above the 1.1” that comes on a factory Sasquatch. Thanks!

 

[Maxlider Brothers Customs]

Yup.
Let's see the CV angles on the 4 inches over SAS height.

It’s not 4” over SAS…. It brings a SAS to almost 4” of total lift over stock base.

 

[Maxlider Brothers Customs]

You asked real questions and scared him off.

LOL… there’s no fear here. Just super busy today with customer visits and meetings. It’s a bit crazy here at the moment!

 

[Maxlider Brothers Customs]

Camera was dead level so you guys can decide for yourselves.

 

[395N]

Camera was dead level so you guys can decide for yourselves.

Are the billows making contact on the inner boot?
I can't tell from the pic, but looks very close.
Hopefully the driver is obese.

 

[TheJohnyBlue]

Camera was dead level so you guys can decide for yourselves.

Any pictures of non sas angles or is there any difference?

 

[395N]

It’s not 4” over SAS…. It brings a SAS to almost 4” of total lift over stock base.

I read someone's post on it saying that.
It wasn't from you..my bad.

 

[Scabieathrax]

Just received mine! Smooth transaction, well packaged, all shook out ready for install very soon!

How were you able to order the stripes? I want to get pricing on the color matched fenders and wheels for my Sasquatch tires.

 

[Cbiggs]

How were you able to order the stripes? I want to get pricing on the color matched fenders and wheels for my Sasquatch tires.

https://www.maxliderbros.com/ !

Sponsored