- First Name
- Bill
- Joined
- Jul 5, 2021
- Threads
- 8
- Messages
- 247
- Reaction score
- 794
- Location
- Evansville IN
- Vehicle(s)
- 2006 F350
- Your Bronco Model
- Black Diamond
6 inches
Sponsored
Sponsored
Maxlider 4” LIFT KIT PREORDER ANNOUNCEMENT!
- Thread starter Maxlider Brothers Customs
- Start date
- Watchers 20
- First Name
- Cory
- Joined
- Mar 7, 2021
- Threads
- 7
- Messages
- 689
- Reaction score
- 1,260
- Location
- West Chester PA, OCNJ
- Vehicle(s)
- 85 CJ, 94 YJ, 04 JK, 17 Taco
- Your Bronco Model
- Badlands
Well worth it. I decided against DIY and had a pro install it. He was totally impressed with the quality and fit. The silver is chameleon like on the white. Totally satisfied with this purchase!You definitely get what you pay for.
- First Name
- Rick
- Joined
- Mar 24, 2021
- Threads
- 17
- Messages
- 1,136
- Reaction score
- 1,827
- Location
- Lincoln Ca.
- Vehicle(s)
- Nissan Frontier 4WD
- Your Bronco Model
- Base
Is someone working on a total of 2.5 or 3 for Squatch? I would feel better with those angles
It needs a 2.0 level, 1.0 in the front is not enough . Another 1/2-3/4 in rear also
So an extra 1.0 over what’s available now. Is what I’m getting at
Would be perfect for 35’s IMO
I guess you could put there are 2 inch lift for stock height on top of the Sasquatch unless it’s different? Would give you 3.2 in Front?
I don’t know, all‘s I know is that I think 35s look stuffed in there needs at least another inch and a half or so higher with level
It needs a 2.0 level, 1.0 in the front is not enough . Another 1/2-3/4 in rear also
So an extra 1.0 over what’s available now. Is what I’m getting at
Would be perfect for 35’s IMO
I guess you could put there are 2 inch lift for stock height on top of the Sasquatch unless it’s different? Would give you 3.2 in Front?
I don’t know, all‘s I know is that I think 35s look stuffed in there needs at least another inch and a half or so higher with level
Sponsored
Similar threads
