Modular Bumper / Fog Pocket Kit Suggestions

[BoMiltenberger]

This has been our experience as well.

If I were you I would look at the new SS5 Bar Coming out vs the light bar! We sell both but the aggressive look and better output would for me is hard to give up! Let me know if I can assist in any way!

More Info on the SS5 -----> https://www.bronco6g.com/forum/thre...-the-worlds-brightest-off-road-led-pod.28487/

What model lights are those on each end of the bumper? I’m interested.

Sponsored

 

[chris@pandamotorworks]

What model lights are those on each end of the bumper? I’m interested.

https://www.pandamotorworks.com/pro...dular-bumper-only?_pos=3&_sid=276c8ef13&_ss=r

Is this what you are looking at in the photo? Just making sure!


Pro series C1 output is very similar Sport SS3 output as well!

 

[privateer35]

Honestly, I prefer the open design, which is why we designed the KR Off-Road bracket that way. It just allows you to run larger lights in any combination you want. The bezels are nice but you're forced into a specific light. We thought about manufacturing a "bezel" style but as I said, that limits you to what you can run.

But no matter if you go with the Baja Designs or Diode Dynamic lights, we stock more lights then anybody else so we allow you to truly customize what lights you select. Not to mention our harness (which was mentioned in the first post) is top notch. We make our own harnesses for Baja Designs AND Diode Dynamics (unlike any other harness on the market).

We have Diode Dynamics and Baja Designs kits in stock (when ordering the KR Off-Road brackets). If you get the Baja Designs kit WITH their "bezel" style bracket that you pointed out, THAT will take a bit to ship as it's not in stock.

I'm not 100% sure but I believe we're the only ones who not only have a bracket readily available for immediate shipping BUT make our brackets right here in the USA. 100% american made out of stainless steel (and we powder coat them). We also include a lifetime warranty.

https://www.4x4truckleds.com/vehicle-specific/ford-bronco/2021-bronco/

Fair enough I'm totally with the DD option! I'm sold!

 

[4x4TruckLEDs.com]

What model lights are those on each end of the bumper? I’m interested.

Those are the Diode Dynamics SS3 and SSC2. The SS3 with backlight are not available yet and are on back-order, that was taken at the SEMA show. You can order those kits here:

https://www.4x4truckleds.com/led-auxiliary-lights/diode-dynamics/vehicle-kits/ford-bronco/

Or starting tomorrow, you'll be able to order that setup WITH our KR Off-Road brackets. The SS3 (with back-light) are being announced tomorrow for pre-sale (shipping end of December/Early January). Right now our kits don't let you select the SS3 back light (until tomorrow) but bookmark this page and you'll be able to add that back-light SS3 on to your kit:

https://www.4x4truckleds.com/diode-...-w-kr-off-road-brackets-for-2021-ford-bronco/

You'll be able to select either 1x SS3 and 2x SSC2 or 2x SS3 and 1x SSC2 in the kit. You also save some $$ with the KR Off-Road brackets + you get a KILLER harness. Our harness actually looks like this for the 3x Back-Lighting setup:

This is the #1 reason folks go with the kits w/KR Off-Road brackets, the harness is just SUPERB

If you want to add lights on top of the bumper and on the corner, the Diode Dynamics SSC1, which are available here:

SAE: https://www.4x4truckleds.com/led-auxiliary-lights/diode-dynamics/ssc1-sae/
Sport: https://www.4x4truckleds.com/led-auxiliary-lights/diode-dynamics/ssc1-sport/
Pro: https://www.4x4truckleds.com/led-auxiliary-lights/diode-dynamics/ssc1-pro/

 

[4x4TruckLEDs.com]

Fair enough I'm totally with the DD option! I'm sold!

That's what we run. Here's some more photos of the Diode Kit shown in a few styles

We did 2x SS3 and 1x SSC2 on our truck.

A nice setup would be:

SSC3 Combo
SSC3 SAE Fog (Yellow)
SSC2 SAE Fog (White)

This way the smaller SSC2 is your main fog, the SSC3 Fog in Yellow is a fog for use in bad weather. Then that last SSC3 combo is a good "over-all" light to light up everything else.

Or you can do

SSC3 Combo
SSC2 SAE Fog (Yellow)
SSC2 SAE Fog (White)

This way you have 2x SSC2 in yellow or amber as your fogs (and you save a bit of cash) and again that Combo light for everything else.

 

[privateer35]

That's what we run. Here's some more photos of the Diode Kit shown in a few styles

We did 2x SS3 and 1x SSC2 on our truck.

A nice setup would be:

SSC3 Combo
SSC3 SAE Fog (Yellow)
SSC2 SAE Fog (White)

This way the smaller SSC2 is your main fog, the SSC3 Fog in Yellow is a fog for use in bad weather. Then that last SSC3 combo is a good "over-all" light to light up everything else.

Or you can do

SSC3 Combo
SSC2 SAE Fog (Yellow)
SSC2 SAE Fog (White)

This way you have 2x SSC2 in yellow or amber as your fogs (and you save a bit of cash) and again that Combo light for everything else.

Ok, now this gives me some ideas

 

[4x4TruckLEDs.com]

Ok, now this gives me some ideas

Yeah we really let you run wild with WHAT you want on the truck. You're not locked into a pre-configuration.

 

[Cat]

This thread was

That's what we run. Here's some more photos of the Diode Kit shown in a few styles

We did 2x SS3 and 1x SSC2 on our truck.

A nice setup would be:

SSC3 Combo
SSC3 SAE Fog (Yellow)
SSC2 SAE Fog (White)

This way the smaller SSC2 is your main fog, the SSC3 Fog in Yellow is a fog for use in bad weather. Then that last SSC3 combo is a good "over-all" light to light up everything else.

Or you can do

SSC3 Combo
SSC2 SAE Fog (Yellow)
SSC2 SAE Fog (White)

This way you have 2x SSC2 in yellow or amber as your fogs (and you save a bit of cash) and again that Combo light for everything else.

Super informative. Thanks to everyone on it, with all the Q&As. I just purchased this combo for my HD bumper:
SSC3 Combo
SSC3 SAE Fog (Yellow)
SSC2 SAE Fog (White)

 

[4x4TruckLEDs.com]

This thread was

Super informative. Thanks to everyone on it, with all the Q&As. I just purchased this combo for my HD bumper:
SSC3 Combo
SSC3 SAE Fog (Yellow)
SSC2 SAE Fog (White)

Good choice. I run a similar setup (mine are the Max)

 

[dweskamp]

How difficult would these be to install for someone who basically has no experience? But generally a handy person.

Easier than putting them together

 

[ATbronco]

https://www.pandamotorworks.com/pro...dular-bumper-only?_pos=3&_sid=276c8ef13&_ss=r

Is this what you are looking at in the photo? Just making sure!


Pro series C1 output is very similar Sport SS3 output as well!

awesome. im thinking of snaggin those c1 for fogs, already have a 30" DD light bar, but wanted amber fogs without spending another 500 haha. any pics of the pro ss1 in amber light output?

Sponsored