- Thread starter
- #1
Right now napa has curt harness 56468 on sale for $57.49
Sponsored
Tell us more, links ..Mine just arrived from NAPA. It was actually just a direct ship from Curt when looking at the shipping label. I'll be using this plus a Hopkins 7 pin wiring kit to do a full 7 pin plug install.
Yes tell us more....Mine just arrived from NAPA. It was actually just a direct ship from Curt when looking at the shipping label. I'll be using this plus a Hopkins 7 pin wiring kit to do a full 7 pin plug install.
Yes tell us more....
So Curt 4 pin harness, + this Hopkins 7/4 plug and mount, + the Bronco Trailer Brake Controller (I plan to use my ford pass points on that), + these terminal pins from Flip, will let me get the brake controller (C201), reverse (C105), and trailer running lights (C201) from the connectors above the drivers fender liner. Then I'll grab power for the Curt module and for the trailer power at the blue/red wires in the drivers taillight area. I'll then cut off the 4 pin connector and wire that plus the 3 wires from the engine bay to get the full 7 pins. I might have a redundant power source but you get the idea.Tell us more, links ..
is curt the only company that currently makes wiring harness? Also on etrailer they list 2 different curt harnesses for with LED lights and one without? anyone know if this one from NAPA will work with LED lights
Looks like they actually have four. Two for LED and two for regular tails.