Need better lug nut that are low profile

[Snacktime]

Looking for a recommendation for Black 12mm x 1.5 60 degree tapper lug nuts that will actual last more than 4-5 uses before the nut head starts deforming. Would like a set that is smaller than 17mm socket as my KMC wheels don't like anything bigger(already using a special thin wall socket).

The cheapies the tire shop gave me are not going back on after my next tire rotation.

Sponsored

 

[Dusty at ICON]

ICON has these: https://www.iconvehicledynamics.com...-lug-nut-kit-black-12-x-15---24-count-w--key/

They should work fine with your KMC's.

 

[Theherofails]

ICON has these: https://www.iconvehicledynamics.com...-lug-nut-kit-black-12-x-15---24-count-w--key/

They should work fine with your KMC's.

I would avoid Icon until their customer service improves.

 

[Raptor911]

I have these >> https://shop.mcgard.com/black-cone-...301-1-hex-or-65302-22mm-hex-installation-tool

They are expensive so shop around.

I run McGard on my GEN3 Raptor and Bronco and I think they are the best lug-nuts you can buy until you go to titanium lug-nuts

 

[Snacktime]

ICON has these: https://www.iconvehicledynamics.com...-lug-nut-kit-black-12-x-15---24-count-w--key/

They should work fine with your KMC's.

I have been looking at a similar design, are these made exclusively for Icon?

I have these >> https://shop.mcgard.com/black-cone-...301-1-hex-or-65302-22mm-hex-installation-tool

They are expensive so shop around.

I run McGard on my GEN3 Raptor and Bronco and I think they are the best lug-nuts you can buy until you go to titanium lug-nuts

I have tried the McGard and they are a no go, hair to big to get the socket in (I have a set of 4 that I was gifted with a vehicle).

 

[Raptor911]

the one I sent you is spline driven and it is plenty small

I have tried the McGard and they are a no go, hair to big to get the socket in (I have a set of 4 that I was gifted with a vehicle).

 

[Dusty at ICON]

I have been looking at a similar design, are these made exclusively for Icon?

They're private-labeled for us by the lug nut manufacturer but they're not our exclusive design. There are other brands that are similar.

 

[j_marinelli]

I went with these via Northridge but they might be similar to what you would get from Discount Tire. I'm happy with mine so far and even comes with a total of 27 to account for spare too.

https://www.bronco6g.com/forum/threads/bronco-lug-nut-package-after-market-wheels.46833/

 

[Elevator Man]

I have the ICON ones mentioned above and haven't had any issues.

Sponsored