- First Name
- Tim
- Joined
- Feb 18, 2021
- Threads
- 2
- Messages
- 29
- Reaction score
- 67
- Location
- North Carolina
- Vehicle(s)
- F150
- Your Bronco Model
- Outer Banks
- Thread starter
- #1
I will be using four SSCPro2 lights with an amp draw of 1.92A.
2 of these will be Fogs and 2 will be driving lights. I plan on using Aux 3 and Aux 4 for these.
The SSCPro 2 also offers an Amber back light when the main beam is off. This draws .06 Amps via a separate power lead.
The Grille lights have an estimated draw of 3 amps or less.
I would like to wire the amber back lights and the grille lights together on one switch.
The fog lights on one switch and the driving lights on one switch.
Does this sound ok???
2 of these will be Fogs and 2 will be driving lights. I plan on using Aux 3 and Aux 4 for these.
The SSCPro 2 also offers an Amber back light when the main beam is off. This draws .06 Amps via a separate power lead.
The Grille lights have an estimated draw of 3 amps or less.
I would like to wire the amber back lights and the grille lights together on one switch.
The fog lights on one switch and the driving lights on one switch.
Does this sound ok???
Sponsored