- First Name
- Phil
- Joined
- Jul 21, 2020
- Threads
- 41
- Messages
- 4,243
- Reaction score
- 14,107
- Location
- IN
- Website
- www.ruxerparts.com
- Vehicle(s)
- Fords
- Your Bronco Model
- Badlands
- Thread starter
- #1
Several folks have inquired about upgrading their suspensions to BL or SAS so I'm trying to gather VINs to make sure the springs are correct for the application.
What I need. VINs for 2d BL with 2.3, non-SAS with tow. 2d BL with 2.3, non-SAS without tow. 2d BL with 2.7, non-SAS with tow. 2d with 2.3, SAS, with tow. 2d with 2.3, SAS without tow. 2d with 2.7, SAS, with tow. 2d with 2.7, SAS without tow.
Basically trying to figure out BL suspension and the other models that have the SAS option. I don't know if tow pkg is going to make a difference but the only way I can tell is by looking it up by VIN in Microcat.
We are looking at putting together assembled units/packages which will eliminate the need to disassemble your current stuff to get the top plate, insulator then have a shop put it all together.
ETA: You can DM your VIN for privacy sake. I put it in the part system, find the suspension, print and delete the VIN.
What I need. VINs for 2d BL with 2.3, non-SAS with tow. 2d BL with 2.3, non-SAS without tow. 2d BL with 2.7, non-SAS with tow. 2d with 2.3, SAS, with tow. 2d with 2.3, SAS without tow. 2d with 2.7, SAS, with tow. 2d with 2.7, SAS without tow.
Basically trying to figure out BL suspension and the other models that have the SAS option. I don't know if tow pkg is going to make a difference but the only way I can tell is by looking it up by VIN in Microcat.
We are looking at putting together assembled units/packages which will eliminate the need to disassemble your current stuff to get the top plate, insulator then have a shop put it all together.
ETA: You can DM your VIN for privacy sake. I put it in the part system, find the suspension, print and delete the VIN.
Sponsored
Last edited: