NEW PRODUCT | Diode Dynamics Capable Bumper Dual Fog Kit from KR Off-Road

[4x4TruckLEDs.com]

NOW IN STOCK

Use coupon code FOGS and save 5%

Give that Bronco some much needed lighting with this Dual Fog Light Kit for the 2021+ Ford Bronco. We pair our KR Off-Road Capable Fog Light Brackets with your choice of two pairs of Diode Dynamics lights, for the ultimate fog light setup.

The KR Off-Road brackets are made out of 12 gauge stainless steel and are powder coated black. The bezel style/flush mount design gives that fog opening a finished look while giving you adjustability in where the lights aim.

Included are the following:

• 1 Pair of KR Off-Road Dual Fog Light Brackets
• 2 Pairs of Diode Dynamics Lights
• Upfitter Wiring Harness (If you don't have upfitters we recommend an auxiliary switch panel)
• OEM Fog Light Pigtails
• Instructions
• Our Lifetime Guarantee. For as long as you own your Bronco, if you manage to break/bend/destroy the KR Off-Road brackets we'll replace them free of charge (not including return shipping)

Our kit is made from 1 piece of stainless steel so it's the most rugged fog bracket on the market for the Capable Bumper. You'll retain your factory fog light switch for 1 pair of lights (the 2nd pair is controlled from your upfitter switch).

https://www.4x4truckleds.com/diode-...brackets-for-2021-ford-bronco-capable-bumper/

Sponsored

 

[2020FordRaptor]

A little sneaky peaky time!

Check out what we've been working on for the last week or so. A dual Diode Dynamics SS3 Fog Kit for the capable bumper.

It'll be a bolt on kit and retains the use of the rear surround/shroud to give it a nice finished look from the sides.

It'll fit 2x Diode Dynamics SS3 Fogs on each side.

We're just finishing up the prototyping phase now. Need to test the light alignment tomorrow and if everything is good, send it off to production (4-6 weeks out from there, maybe sooner depending on how busy our powder coater is).

But here ya go... something for the wish lists...

View attachment 399923

View attachment 399924

View attachment 399925

View attachment 399926

Looks good!

 

[Lewisj41]

These looks awesome. Just installed on my Tacoma and man what a difference they man, almost night and day difference!

 

[Lowcountry Bronco]

Nice!

 

[4x4TruckLEDs.com]

Another behind the scenes. We needed to level out the lights a bit so we 3D printed an updated version to test alignment. Sent the design to our laser cutter to have them cut us a new sample (we'll have those end of next week).

If everything is good, we'll start taking pre-orders in about a week.

These don't sit as perfect as the stainless, because it's PLA from our 3D printer, so it tends to sag a bunch and not sit properly. BUT you get the idea.

 

[4x4TruckLEDs.com]

I added some new photos to the first post, but some photos from today. The final product will have a powder coated finish (this is just rattle canned to give you an idea)

 

[BroncoPls!]

@Jett_McCrazy you need this!

 

[Jett_McCrazy]

@Jett_McCrazy you need this!

that looks nice!

 

[Hutchem]

Subscribed!

 

[4x4TruckLEDs.com]

We've decided to start taking pre-orders on this kit. We also decided to add the dual kit into our PRIME DAY SALES. So you'll save an extra 10% off the fog kit!

We're putting an ETA of 11/28 on these kits right now. That is the worst case scenario. We might be able to get them sooner. We're still waiting on our metal fabricator to get back to us with the details but 11/28 would be a worst case scenario.

You can pre-order your kit here: https://www.4x4truckleds.com/diode-...brackets-for-2021-ford-bronco-capable-bumper/

Each kit will include 2 pairs of lights, an OEM pigtail (to connect 1 pair to your factory fog switch) as well as an upfitter harness (for the 2nd set of lights). You have the option of upgrading both pairs to the back-lighting as well.

 

[RC Bronco]

Oh man, this is what you told me about when I inquired about ditch lights and I couldn't find it. These look amazing!

 

[4x4TruckLEDs.com]

Oh man, this is what you told me about when I inquired about ditch lights and I couldn't find it. These look amazing!

Yeah they came out really nice. Stainless steel. Dual mounting points so they won't shake or vibrate around either. It also retains the factory shroud on the rear of the bumper to keep a nice finished look of the bumper

 

[Fathom]

I'm in ...with some information. 1) How tough is the installation? 2) You left your parking sensors out which makes me worry it isn't easy on the capable bumper to remove/reinstall, is it? 3) I'm confuse from your web page which light does what. I want ousides as fogs and insides as driving with backlight on all if possible. I have installed a number of PIAA and Rigid lights on many vehicles but I'm getting old!

 

[4x4TruckLEDs.com]

I'm in ...with some information. 1) How tough is the installation? 2) You left your parking sensors out which makes me worry it isn't easy on the capable bumper to remove/reinstall, is it? 3) I'm confuse from your web page which light does what. I want ousides as fogs and insides as driving with backlight on all if possible. I have installed a number of PIAA and Rigid lights on many vehicles but I'm getting old!

Installation is pretty straight forward. You just have to remove the bolts on the back of the bumper to remove the plastic cover and the OEM Fog lights. Then install ours, re-install bolts. Pretty straight forward (turn your wheel outwards on each side you are working on to give yourself more room).

To be honest though... we found it easier to just remove the entire bumper completely. There are 3 bolts on each side that hold the bumper on. This makes things easier. It sounds weird to remove a bumpber BUT it's so easy. BUT not necessary. You just need to work from behind/under the bumper is all if you leave it installed. Still easy to do

We don't have parking sensors. Our bumper is a used bumper we bought for R&D, so it had no sensors. Sensors won't matter as they don't get in the way at all and their harnesses are all tucked behind the bumper anyway and secured. No issues at all.

You get to pick whatever combination of lights you want. You can choose 2 pairs of lights. We don't pre-install the lights, you install them when you get them to the bracket.

 

[RC Bronco]

I'm in ...with some information. 1) How tough is the installation? 2) You left your parking sensors out which makes me worry it isn't easy on the capable bumper to remove/reinstall, is it? 3) I'm confuse from your web page which light does what. I want ousides as fogs and insides as driving with backlight on all if possible. I have installed a number of PIAA and Rigid lights on many vehicles but I'm getting old!

Not sure what kind of info you're looking for on "what light does what", but I found this graphic on DD's website and it was informative for me

Sponsored